IMPORTANT MANUAL
DO NOT THROW AWAY
ILLUSTRATED PARTS LIST
WARNING:
Read this Manual and follow all Warnings
and Safety Instructions. Failure to do so
can result in serious injury.
MODEL:
VF550
FRONT TINE TILLER
ALWAYS WEAR EYE PROTECTION DURING OPERATION
12.21.10 CL
Printed in the U.S.A.
532 43 99-79
TILLER - - MODEL NUMBER VF550 (96082001501)
ENGINE, TRANSMISSION, AND TINES
4
5
2
1
3
2
6
7
9
5
7
10
11
8
12
18
13
19
14
15
20
16
17
21
13
25
23
22
30
30
24
28
5
5
27
29
31
26
engine-transmission-tines_1
29
18
TILLER - - MODEL NUMBER VF550 (96082001501)
ENGINE, TRANSMISSION, AND TINES
KEY PART
NO. NO.
DESCRIPTION
1
- - - -- -- --
Engine B & S Model No. 10T802-1390-BI
2
872 11 06-08 Bolt Carriage 3/8 - 16 x 1
3
873 90 05-00 Nut Lock Flg 5/16 -18 unc
532 42 53-98 Plug Snap In
4
5
873 90 06-00 Nut Lock Flg 3/8 - 16 unc
532 43 54-71 Shroud Till Clutch
817 00 06-16 Screw 3/8 - 16 x 1-1/2
532 42 13-35 Sheave Upper
432 42 13-41 Stud Belt Guard
532 17 53-31 Bushing Pivot
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
532 42 13-73 Spring Return
532 42 13-39 Bracket Idler
874 61 06-16 Bolt Hex 3/8 - 24 x 1
532 42 13-79 Belt Drive
532 42 13-78 Pulley Idler
819 13 14-16 Washer 13/32 x 7/8 x 16 Ga.
874 78 06-20 Bolt 3/8 - 16 x 1.25
532 13 39-44 Washer .328 x 1.375 x 0.055
874 76 05-14 Bolt Fin Hex 5/16-18 x 7/8
532 43 62-81 Shield Tine
532 42 13-40 Seal Foam
819 41 35-24 Washer 13/32 x 1-1/2 x 11 Ga.
532 42 13-36 Sheave Lower
532 42 13-34 Coupling Clutch
532 15 69-26 Tine Outer RH
532 15 69-24 Tine Inner RH
532 15 69-25 Tine Outer LH
532 15 69-23 Tine Inner LH
532 04 92-90 Pin Clevis
532 12 46-60 Retainer Spring Zinc
532 42 53-99 Transmission
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
19
TILLER - - MODEL NUMBER VF550 (96082001501)
HANDLE, WHEEL, AND DEPTH STAKE
2
3
1
24
7
5
8
4
6
9
23
10
13
5
10
14
15
19
21
18
5
22
11
12
23
20
16
17
18
17
19
17
22
20
21
Handles-Wheels-Depth Stake_1_r1.ai
20
TILLER - - MODEL NUMBER VF550 (96082001501)
HANDLE, WHEEL, AND DEPTH STAKE
KEY PART
NO. NO.
DESCRIPTION
1
532 43 62-80 Console Tiller Handle
532 16 57-87 Grip Handle
2
3
532 43 13-32 Assembly Handle Column
872 01 05-20 Bolt 5/16 - 18 x 2.50
532 19 19-38 Knob Wing
4
5
6
532 42 50-91 Lever Control Tine
812 00 00-59 Retainer Ring
7
8
532 43 17-62 Pin Pivot
9
532 42 41-90 Handle Lower
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
532 42 53-98 Plug Snap In
532 43 25-21 Weldment Transport Arm
532 12 49-61 Clip Hairpin
532 42 13-42 Stake Depth
532 00 32-60 Pin Clevis
872 11 06-10 Bolt 3/8 - 16 x 1-1/4
874 78 06-40 Screw Hex Head 3/8 - 16 x 2.5
873 90 06-00 Nut Lock Flg 3/8 - 16 unc
872 14 05-36 Bolt 5/16 - 18 x 4.5
532 40 38-59 Wheel
819 17 14-16 Washer 17/32 x 7/8 x 16 Ga.
532 12 11-17 Bolt Shoulder "A" 2.28 " B" 1.53
532 42 13-45 Bracket Wheel
819 11 12-16 Washer 11/32 x 3/4 x 16 Ga.
532 43 49-48 Lever Control
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
21
PARTS AND SERVICE
Thisproducthasbeenexpertlyengineeredandcarefullymanufacturedtorigidqualitystandards. Aswithallmechanical
products, some adjustments or part replacement may be necessary during the life of your unit.
For Parts and service, contact our authorized distributor: call 1-800-849-1297
•
For replacement parts, have available the following information:
a. Model Number/Manufacturer's I.D. Number
b. Description of part.
For Technical Assistance: call 1-800-829-5886
NOTE: HOP provides parts and service through its authorized distributors and dealers; therefore, all
requests for parts and service should be directed to your local dealer(s). The philosophy of HOP
is to continually improve all of its products. If the operating characteristics or the appearance
of your product differs from those described in this Manual, please contact your local dealer
for updated information and assistance.
|