Polaroid Portable DVD Player PDV 077PT User Manual

7” Portable DVD Player  
PDV-077PT  
Operation Manual  
20040928  
 
Important Safety Instructions  
WARNING: To reduce the risk of fire  
or electric shock, DO NOT expose this  
product to rain or moisture.  
The lighting flash with arrowhead symbol,within an triangle, alerts the user  
to “dangerous voltage” which could cause electric shock.  
The exclamation point within a triangle indicates to the user to read important  
operating and maintenance instructions in the manual.  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
NOTES  
2. DANGER: Visible laser radiation when open and interlock  
failed or defeated. Avoid direct exposure to beam.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
3. CAUTION: Do not open the top cover. There are no user  
service-ablepartsinsidetheunit.Leaveallservicingtoqualified  
service personnel.  
4) Follow all instructions.  
5) Do not use near water.  
6) Clean only with dry cloth.  
This unit complies with FDA regulation for radiation control of  
laser products  
7) Do not block any ventilation openings. Maintain well ventilated conditions around the  
product, Do not put product on bed, sofa or anything that blocks ventilation. Install  
in accordance with the manufacturers instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the other. A grounding type plug has  
twobladesandathirdgroundingprong. Thewidebladeorthethirdprongisprovided  
for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10)Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,  
or sold with the apparatus. When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14)Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatus  
has been damaged in any way, such as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
- 3 -  
 
Precautions with Moisture  
Under the following circumstances, moisture may appear on the lens of the product,  
which is the most sensitive part of the DVD player:  
- The DVD player is suddenly moved from a cold place to a warm place.  
- A room is heated while the DVD player starts operating, or the DVD is placed near  
an air-conditioner.  
- In the hot summer season, the DVD player is moved from an air-conditioned room  
to a hot, damp place for use.  
- The DVD player is being operated in a damp place.  
If moisture appears on the player, stop operations.  
If the player is operated under said conditions, or the disc is loaded, certain interior  
components could be damaged. Take the disc out, plug power in and switch power  
the DVD player on for two to three hours to dry.  
- 4 -  
 
Function Features  
1. EXCELLENT SOUND  
8. ON-SCREEN DISPLAY  
Dolby digital delivers great sound.  
2. HIGH RESOLUTION  
On-screen displays in your choice of  
English, French and so on.  
MPEG2 decoding format achieves more  
than 500 lines of horizontal resolution.  
3. SPECIAL FUNCTIONS  
9. AUDIO OUT  
Audio output terminal for connection to  
audio amplifiers.  
Supportsmulti-angle,excessive language  
caption.  
10. EARPHONE OUTPUT  
Convenientforlisteningtomoviesormusic  
in private.  
4. COMPATIBILITY  
Plays DVD, CD, CD-R, CD-RWandMP3  
discs.  
11. REVOLVING TFT LCD screen  
Adjust the screen for custom viewing  
byrevolvingithorizontallyaboutitsaxis,  
or lay it flat with the screen facing up.  
12. SWITCHING POWER ADAPTER  
Automatically adapts to voltage  
requirementsintheUSandothercountries.  
5. PARTICULAR PERFORMANCE  
Multi-speed,fastforward,fastbackward,  
slow play and repeat playback.  
6. SEARCH BY TIME  
Search for a certain time on a disc.  
7. LAST MEMORY PLAYBACK  
Continues playing from place stopped.  
DVD players and discs are coded by region. These regional codes must match  
the discs they play. If the codes don’t match, the disc won’t play.  
This players code is region 1.  
This product incorporates copyright protection technology that is protected  
by method claims of certain U.S. patents and other intellectual property rights  
ownedbyMacrovisionCorporationandotherrightsowners.Useofthiscopyright  
protection technology must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly  
is prohibited.  
- 5 -  
 
Parts Introduction  
DVD Player  
1. Power switch  
15. TFT LCD Screen can be rotated in  
the degree of 180.  
2. Disc cover  
3. Open  
16. MODE button  
4. Remote sensor  
The player is with TFT display mode:  
normal screen (43) or wide screen  
(169).  
5. Prev skip button  
Press to skip to previous chapter/track.  
6. Next skip button  
Press to skip to next chapter/track.  
7. ENT button  
17. Speaker  
For enjoying high quality stereo music.  
18. BRIGHT up/down  
8. Direction buttons  
9. AUDIO button  
19. TFT Liquid Crystal Display  
20. Latch hook  
10. STOP button  
21. COLOR up/down  
11. PLAY/PAUSE button  
12. Title button  
22. Rotate button  
The picture can be rotated in inversion  
and enantiomorphism from normal  
modes.  
13. Menu button  
14. INFO button  
Press for detailed information on the disc  
playing.  
Keep pressing to remove information  
from screen.  
- 6 -  
 
Parts Introduction  
Right Side Of The Panel  
1. Earphone volume adjusting knob  
-Used to adjust the earphone and speaker volume.  
2. Earphone jack  
-HI-FI earphone output, when this jack is connected, speaker volume is turned off.  
3. Audio output/input jack  
4. Video output/input jack  
5. Switch position between AV IN’ and AV OUT’  
-Switch to IN, then the player is in audio and video input mode.  
-Switch to OUT, then the player is in normal playback mode.  
6. Direct current 9.5 V input jack  
Left Side Of The Panel  
7. Earphone jack  
- 7 -  
 
Remote Control  
1. PWR button  
5. ENTER button  
-Press to enter standby mode.  
2. INFO button  
-Press to confirm the items or setting.  
6. SETUP button  
-Press for detailed information on the  
disc playing.  
-PresstoaccesstheDVDplayerssetup  
menu.  
-Keep pressing to remove information  
from screen.  
7. 0-9 number buttons  
-Select numbers by pressing these  
buttons.  
3. TITLE button  
-Presstodisplaytitlesifpresentonthe  
disc.  
8. PREV SKIP button  
-Press to go to beginning of current  
track. Press twice repeatedly to go to  
beginning of previous track.  
4. Direction buttons  
-Press to select menu items.  
- 8 -  
 
Remote Control  
9. NEXT SKIP button  
-Press to go to next chapter.  
10. SUBT button  
17. STOP button  
-Press once to stop playback and then  
press PLAY button to resume normal  
playback.  
-WhenaDVDisplaying,presstoselect  
a subtitle language or to turn subtitles  
off (if the DVD disc contains multiple  
subtitles).  
-Press the button twice repeatedly to  
stop playback completely.  
18. PLAY button  
11. ANGLE button  
-Press to begin playback.  
19. GOTO button  
-Presstoaccessvariouscameraangles  
(iftheDVDdisccontainsmultiplecamera  
angles).  
-Presstoselectthedesireddiscstarting  
time, track or title.  
12. A-B button  
20. +10 button  
-Press to mark a segment to repeat  
between A and B.  
-Select numbers greater than 9 by  
pressingthe(+10)buttonfirst,andthen  
an additional number button.  
21. FWD SCAN button  
-Press to search forward.  
22. REV SCAN button  
-Press to search backward.  
23. SLOW button  
13. ZOOM button  
-Press to cycle through zoom function.  
14. REP button  
-Press to repeat a chapter, track, title,  
or all content.  
15. MENU button  
-Press to select the disc menu.  
16. PAUSE button  
-Presstoactivateslowforwardorslow  
rewind.  
-Press to pause playback.  
-Press PLAY button to resume normal  
playback.  
24. AUDIO button  
-Presstoaccessvariousaudiolanguages  
(iftheDVDdisccontainsmultipleaudio  
languages).  
- 9 -  
 
Connections  
Connecting to a TV  
Audio/video connections  
1. Always ensure that the DVD player, TV and any other electrical equipment you are  
connecting the DVD player to is switched off and unplugged from the power supply.  
2.TheeasiestwaytoconnecttheDVDplayertoatelevisionisviathesuppliedAudio/Video  
connections. Connecttheaudio/videocablefromtheDVDplayertotheTVsaudio/video  
inputs.  
Connecting to an Amplifier with Dolby Digital Decoder  
The DVD player can be connected to an AV amplifier with a Dolby Digital decoder via  
theDigitalOpticaloutput. PleaserefertoyourAudioequipmentsmanualbeforeconnecting.  
- 10 -  
 
Playback Preparations  
Usage of Remote Control  
1. Refer to the drawing and remove the empty battery receptacle.  
2. Prior to shipping, a separating film was applied to the battery. Remove this film.  
3. Insert the battery into the receptacle and insert the receptacle into the remote.  
4. For best results, aim the remote directly at the players receiving windowwithin  
the range of 15 feet, and angles of 60 degrees.  
5. Under normal use the battery will last for one year.  
6. Remove battery if the device is not to be used for a long time during storage.  
- 11 -  
 
Playback Preparations  
Disc Formats Supported by this Player  
The unit can play discs bearing any of the following logos:  
PLAYBACK TIME/  
PLAYABLE SIDES  
DISC LOGO  
DIAMETER  
133 minSS-SL)  
242 minSS-DL)  
266 minDS-SL)  
484 minDS-DL)  
41 min ( SS-SL )  
75 min ( SS-DL )  
82 min (DS-SL)  
12cm  
DVD  
8cm  
150 min (DS-DL)  
12cm  
74 min  
CD  
8cm  
20 min  
MP3  
12cm  
600 min  
The operating method of some DVD discs is specified by the software maker. Please  
refer to the instruction manual of the disc.  
TheDVDPlayerwillplaymostrecordable(CD-R)orerasable(CD-RW)CDs,butplayback  
ofCD-RorCD-RWdiscscreatedonacomputerrequiresproperformattingandfinalization  
of the disc for audio playback. Some computers and/or software programs may not  
be capable of creating compatible discs.  
About Disc Terms  
- Title  
Generally, pictures or music compressed on a DVD are divided into several sections,  
“title”.  
- Chapter  
The smaller section unit of picture or music in a DVD under the title, usually one  
title is comprised of one or more chapters and each of them is numbered for easy  
searching. But some discs may not have a recording chapter.  
- Track  
A segment of picture or music on a CD. Each track is numbered for searching.  
- 12 -  
 
Playback Preparations  
Usage of Power Switching Adapter  
The player is supplied with a power switching adapter.  
1. Connect AC adaptor to the power jack marked “DC 9.5 V IN” on the side of the  
DVD player.  
2. Connect the rabbit joint end of the AC adaptor to the power cord.  
3. Plug the two-prong end of the power cord to a grounded electrical socket.  
Note:Pleaseturnplayerspowerofffirstandthenunplugthepowertopreventmalfunction.  
Pre-operation  
1. Connect to power.  
2. Lift the main cover up to open the player.  
3. Switch “POWER” to the “ON” position.  
4. Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).  
Loading a disc  
1. Press the OPEN button to open the disc cover.  
2. Put disc into the tray house with the printed side up.  
3. Close the disc cover.  
- 13 -  
 
Power Supply  
About the Rechargeable Battery  
Your portable DVD player comes with a lithium ion rechargeable battery that attaches  
to the bottom of the player.  
1. Under normal working conditions, the battery can be charged and discharged over  
300 times.  
2. The properties of the rechargeable battery are: 7.4 Volts, with a capacity of 4200mAh,  
interior lithiumionic electric circuit protection for recharge and discharge.  
3.If the battery is not used it will automatically discharge gradually within one month.  
4.If you don’t plan on using the battery for an extended period of time, discharge the  
battery and keep it in a dry and cool place.  
5.If the battery loses power during play, stop playing the DVD, otherwise damage may  
occur.  
6. A fully charged battery is able to play a DVD with the TFT on for about 2.5 hours.  
Note: Playing time varies from disc to disc.  
7. Working conditions and precautions:  
New batteries should be fully charged before initial use.  
Battery should only be used and charged  
when temperatures are between 32-95F.  
Never put the battery in fire or water.  
Do not expose the battery to high temperatures or store in hot, sunny places.  
Maintain well-ventilated conditions around the product, avoiding heat. Don’t put  
the product on bed, sofa or anything that may block ventilation to the product.  
Don’t use metal to link positive pole to negative.  
Do not open the battery.  
Do not leave battery attached when using alternative power source.  
Never charge the battery for more than 8 hours. Detach battery immediately  
after charging is complete.  
Detach battery when not in use.  
- 14 -  
 
Power Supply  
Using and Charging the Battery Pack  
Charge the Battery Pack before using it the first time. Charging time is normally about  
4 hours. Normally, the Battery Pack can be charged approximately 300 times. When  
fully charged, the Battery Pack delivers 2.5 hours of continuous power.  
Battery Pack should be fully charged before initial use!  
1.Attaching the Battery Pack  
Turn the player upside down on a smooth, clean  
surface. Direct the battery so that the battery  
contactsandthefiveplastictabsarealignedwith  
the matching contacts and tab recesses on the  
player.  
2.Lock the Battery Pack to the Player  
With one hand on the player to prevent it from  
moving, push the battery pack on to the player  
then slide the Battery Pack toward the front of  
the Player until you hear it click and lock into  
place.  
3.Charging the Battery Pack  
Plug the Power Adapter into the Players DC-IN  
9.5 V Jack (located on Right Side of Player). Plug  
theotherendofthePowerCordintoahousehold  
wall Power Outlet.  
Recommended Recharging and Charging Times  
Your new battery should be fully charged before it is used for the first time. Charging  
timeisnormallyabout4hours. Afullychargedbatterydelivers2.5hoursofuse. Therefore,  
we recommend that you only charge the battery when the battery is down to its last  
hour of charge or completely out of power. Unnecessary charging of the Battery Pack  
will reduce service life. When the Battery Pack is being charged, the battery indicator  
will turn red. After charging is complete, the red light will turn to green.  
- 15 -  
 
Detaching Battery Pack  
Detaching Battery Pack from the unit:  
If the player is not going to be used for a long period of time, we recommend that  
you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming  
some power in STANDBY mode. This could lead to discharging the battery. Make sure  
the power is turned off before detaching the Battery Pack. After detaching the battery  
pack, take care when handling the unit.  
1.Slide and hold in position.  
Press the tab towards the front of the unit. Hold  
the tab in the up position.  
2.Taking off the Battery Pack  
Gently slide the Battery Pack toward the back of the  
Unit. Carefully lift the Battery Pack from your player.  
Using a Car Adapter  
You can use the Car Adapter while in a vehicle:  
Connecting the Car Adapter Power Plug into the units  
Power Jack and the other end to the Vehicle Cigarette  
Lighter Socket:  
Quick Tips  
Do not operate the unit or view video software while driving a vehicle.  
Place the unit in a secure position for viewing.  
Do not leave battery attached when using car adaptor as power supply.  
Do not connect the unit to the car adapter when starting the car.  
Using Headphones  
Using Headphones while you are in a quiet area:  
Connect the Headphone Connector into right side of  
the units Headphone Jack:  
Quick Tips  
Excessive loud usage of headphones could damage your hearing.  
Turn down the Volume before you connect the headphones.  
Sound from the units external speaker will cease when headphones are connected  
- 16 -  
 
Basic Operation  
Please read these instructions carefully before using your DVD player for the first  
time.  
1. Turn on the players power by switching the POWER switch on the side of  
the player to “ON”.  
2. Press OPEN button on front panel to open the disc cover.  
3. Load disc with the label facing up to prevent damage to the player or disc.  
4. Close the disc cover. The player will automatically search for the disc and when  
it finds it, play will begin.  
Warning: Do not play poor quality discs to prevent damage to the lens.  
Start to Playback  
1. Press the PLAY button on the remote control.  
2. Press the ꢄꢅꢆꢇ(direction button) or the number buttons to select a scene.  
3. Press the ENTER or PLAY.  
Pause  
Press the PAUSE button on remote to pause.  
Press the PLAY button to resume normal playback.  
Zoom  
Press the ZOOM button on remote to cycle through to different zoom settings.  
Normal – 2x – 3x – 4x – 1/2 – 1/3 – 1/4.  
While in zoom mode use direction keys to move around to different positions on  
the picture.  
- 17 -  
 
Basic Operation  
Stop  
During playback, press the STOP button once on the remote control to stop playing.  
Press the PLAY button, then the player will play from the point where it stopped.  
Mode  
During playback, press the MODE button on the control panel to change the aspect  
ratio on the screen.  
Title Menu  
1. Press the TITLE button on the remote control during payback. The title menu  
will appear on the TFT screen.  
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select the title or  
disc option you wish to play.  
3. Press the ENTER button to start playback.  
Previous and Next  
1. Press the PREV button twice repeatedly on the remote control, and playback  
will start from the previous track.  
2. Press the NEXT button on the remote control, and playback will start from the  
next track.  
- 18 -  
 
System Setup  
GENERAL SET-UP  
You canchangethedefaultsettingstocustomizeperformancetoyourownpreference.  
1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote  
control, the settings menu will appear. It includes General Setup, Speaker Setup,  
Dolby Digital Setup, Video Setup and Preference setup.  
2. Press ꢄꢅꢆꢇ (direction buttons) on the remote control to select a category.  
3. All the items in the category will appear on the TV screen. Press the ‘ENTER’  
button to confirm your selection.  
Category  
1. When you enter a category all the items under this category will appear, and  
the items placed in the middle (or highlighted) will be the current set up.  
2.Press(rightdirectionbutton)ontheremotecontroltoselectthecorrectcategory.  
3. Press the direction button to select your preference. The item you select will  
be highlighted.  
4. Press the ‘ENTER’ button for confirmation.  
5. Press(left direction button) to enter the other setup menu.  
General Setup  
The general setup is shown as follows:  
1. TV Display  
Select Normal/PS when a 4:3 TV is connected.  
Display images with marking bars above and below the picture.  
Select Wide when a 16:9 wide screen TV is connected.  
2. Angle Mark  
If the scene was shot from multiple angles, then you can easily change the camera  
angle of the scene you are watching.  
ON/OFF  
With this switched on you will be notified if alternative viewing angles are available.  
3. OSD Lang  
TherearefivekindsofdifferentOSDlanguagesforselection.Youcanselectitaccording  
to your preference.  
- 19 -  
 
System Setup  
4. SPDIF Output  
This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital  
audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is  
Dolby Digital, then the digital audio output is also Dolby Digital. Select ‘SPDIF/PCM’  
when you connect with a 2 channel digital stereo amplifier.  
5. Captions  
You can choose captions on or off on screen during playback.  
6. Screen Saver  
When activated, the screen saver automatically works if there has been no operation  
for a period of time.  
Speaker Setup  
Downmix  
SelectLT/RTinDOWNMIX,thentheplayerwilloutputmixedaudioinawayprescribed  
by Dolby. Select “Stereo”, then the player will output a stereo signal.  
Dolby Digital Setup  
1. Dual Mono  
The function is used to set the output mode of channel left/right, stereo and mixed  
sound.  
2. Dynamic  
Usethisitemtoadjustlineardynamiccompressionratetogetdifferentsignalcompression  
effects.  
Video Setup  
1. Sharpness  
Use this item to adjust sharpness setting.  
2. Brightness  
Use this item to adjust brightness level.  
3. Contrast  
Use this item to adjust contrast level.  
- 20 -  
 
System Setup  
Preference Page  
1. Audio, Subtitle, Disc Menu  
There are several audio, subtitle and menu languages in some DVD discs. If there  
is no specific preset in the disc, then the set audio, subtitle and menu language  
will have the priority to be played first.  
2. Default Reset  
Use this function to reset all the settings.  
IMPORTANTNOTE:IfconnectedwithTV,pleaseselectrelevantTVsystemdepending  
on your TV type. This menu function is not available while a disc is playing.  
Audio  
DVD discs contain up to 8 audio bit streams. For Example: English, French etc.  
To select the audio bit stream you prefer press the AUDIO button on the remote  
control during playback. The DVD player will play the next audio bit stream every  
time you press the AUDIO button in succession.  
NOTE: This function is only available for discs that several audio bit streams have  
been recorded onto.  
- 21 -  
 
Playback Functions  
Fast Forward & Rewind  
Press the and buttons to active fast forward or rewind.  
Slow Forward & Rewind  
Press the SLOW button to slow forward or rewind.  
Repeat  
1. Repeat a title, chapter or track. Press the REPEAT button on the remote control.  
Continually pressing the REPEAT button will display a menu as follows: Chapter,  
Title and All.  
2. You can temporarily mark your own section of a DVD that you would like to  
play repeatedly. You do this by marking the start and the end of the section using  
the A/B button. During playback press the A-B button on the remote control at  
the beginning of the segment (point A) you wish to play repeatedly. Press the  
A-B button again at the end of the segment (point B).  
The DVD player will automatically return to point A and repeat playback of the  
selected segment. (A-B). To resume normal playback press the A-B button again.  
Subtitle  
A DVD disc can be recorded with up to 32 subtitles.  
Press the SUBTITLE button on the remote control, the mode of subtitles will recycle  
as follows: SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle  
2 appears on the screen.  
SUBTITLE N/N: Subtitle N (N is the total number of subtitles that the current disc  
contains) appears on the screen. SUBTITLE OFF: No subtitle.  
NOTE: This function is available on DVD disc that recorded with multi-subtitles.  
Angle  
If the scene was recorded from multiple angles, you can easily change the camera  
angle of the scene you are watching.  
Press the ANGLE button on the remote control during playback. Playback will shift  
to another angle. If the disc menu gives the options of angles items, you can switch  
angles for viewing by pressing the number buttons on the remote control.  
NOTE: This function is only available if a disc is a multi-angles recorded disc.  
- 22 -  
 
Playback Functions  
Search by time  
You can use the GOTO button to search by time, namely to play from a specific  
time. During DVD playback, press the GOTO button once and TV screen will display  
the title or chapter, then you can use number buttons to select any one of them.  
Press the GOTO button the second time, then you can use number buttons to input  
the time you desired (hour, minute, second) and the player will play from the inputted  
time.  
Resume Playback  
1. Press the STOP button at the location if you wish to interrupt playback. The player  
memorizes the location where playback was stopped.  
2. Press the PLAY button to resume normal playback. The player resumes playback  
from the location where you stopped playback. This function does not operate if  
the disc is removed.  
Press the STOP button twice or open the disc tray, playback will then be stop  
and when PLAY button is pressed, the play will begin from the beginning of disc.  
Playing an MP3  
MP3 is the third audio compression format of international standard MPEG, which  
compresses the audio signal at the rate of 12:1. Using MP3 format, one disc can  
record more than 600 minutes music, the sound quality is similar to that of CD  
discs.  
TherearemanydifferentformatsforstoringMP3songs.Usually,oneMP3discincludes  
many folders (directories) and every folder includes several files (songs).  
In stop status, press the up/down direction button to select the directory as you  
desireandpresstheENTERorPLAYbuttonforconfirmation,usetheup/downdirection  
buttons again to select the desired track.  
During MP3 playback, press the previous or next skip button to turn the page.  
y There is no search by time and slow playback function for MP3 discs.  
- 23 -  
 
Playback Functions  
Playing a JPEG  
JPEG is a common picture format that requires very little storage per image with a  
low loss rate in resolution. Hundreds of pictures can be stored on a disc in this  
format. In order to create digital albums from film pictures, have your film  
developer make a ”PICTURE CD” in JPEG format.  
OPERATION  
1. Normal Playback  
Load a JPEG disc in. After reading the disc, OSD will display the menu. Use the  
direction buttons and ENTER button to choose items.  
y Many discs have other items besides pictures.  
2. Picture Rotation  
It can be operated when the picture is normally displayed. Once another picture  
is selected, rotating function will not be effective.  
There are four kinds of rotational modes, you can use direction button to choose:  
LEFT ----- Inversion/Normal  
RIGHT ----- Enantiomorphism/Normal  
UP  
----- Rotate up  
DOWN------ Rotate down  
3. Zoom of Picture  
ZOOM button is used to turn on/off zoom and move function.  
As the zoom function is turned on, use the fast forward or reverse scan button  
to display relevant zoom proportion. Use the direction buttons to change and enlarge  
the point of the picture ratio.  
When zoom function is not available, the picture will display normally. Press the MENU  
button to return to the menu.  
Press the STOP button once to activate preview mode.  
y Influenced by making method, some JPEG discs can only be played normally  
with no rotate or zoom functions.  
- 24 -  
 
Care of Discs  
How to hold discs  
Cleaning Care  
When loading or removing discs, try not  
to touch their playing surfaces.  
Use a soft, dry cloth for cleaning. For  
stubborn dirt, soak the cloth in a mild  
detergentsolution;ringwellfirstandwipe.  
Use a dry cloth to wipe it dry. Do not  
use any volatile agents such as benzine  
or paint thinner, as they may damage the  
surface of the player.  
Cleaning  
Fingerprints or other dirt on the disc may  
affect sound and picture quality. To clean  
your discs, use a soft clean cloth to wipe  
them. If necessary, moisten a soft cloth  
with diluted neutral detergent to remove  
heavy dirt or fingerprints.  
Lens cleaner  
Theplayerspickuplensshouldnotbecome  
dirty under normal use, but is for some  
reasonitshouldmalfunctionduetosoiling,  
contact your nearest authorized service  
center. Lens cleaners are commercially  
available, but special care should be  
exercisedintheirusesincesomemaycause  
damage to the lens.  
Donotwipeinacirculardirection(Concentric  
scratchesinthediscgroovetendtocause  
noise.) Gently wipe from the inside to the  
outer edge.  
- 25 -  
 
Special Notes On Revolving TFT LCD Screen  
The revolving TFT LCD screen is one of the outstanding features of this product. Take  
the following steps for proper operation.  
1.Openthescreencovertoposition(A)asshown  
in left figure at which the screen is vertical  
to the operation panel.  
Pos A  
2. Rotate the screen horizontally about its axis  
in the clockwise direction only. The maximum  
revolution is 180 degrees (position C). You will  
hear a click and the screen faces backward. If  
you want to return to initial position (A) revolve  
screen counter clockwise until it clicks.  
Pos B  
3.Youcanrotatethescreenverticallyfromposition  
C to the operation panel as indicated in left  
fig.  
Pos C  
4. Thefinalrotatingposition(positionD)atwhich  
the screen faces upward with its back to the  
operation panel.  
Pos D  
- 26 -  
 
Troubleshooting  
Symptom  
What To Check  
Make sure the AV IN/OUT switch on the side of the  
player unit is in the OUT position for standard play.  
Make sure the disc cover is closed.  
Make sure a disc is loaded.  
Make sure the disc isn’t loaded upside down.  
Disc should be clean, not dirty or warped.  
Playersregioncodeshouldbethesameasregioncode  
of DVD disc.  
The player cannot play.  
Haswatercondensationhasoccurred?Ifithas,remove  
the disc and keep the player powered up for at least  
two hours.  
Make sure system connection is correct.  
Make sure the speakers are turned on.  
Make sure the sound setup of DVD disc is correct.  
Is your disc dirty or warped? Clean or replace disc.  
There is no sound.  
Make TV is turned on and in correct video mode.  
Make sure your system connection is correct.  
There is no picture.  
Poor AV performance.  
Is your disc dirty or warped? Clean or replace disc.  
Make sure the player is not in A-B repeat status.  
Press A-B button to cancel it A-B repeat status.  
Is your disc dirty or warped? Clean or replace disc.  
Cannot continue playback, plays  
a section repeatedly.  
Make sure there aren’t any obstructions between the  
remote control and the player.  
Make sure you are pointing the remote control at the  
player.  
Theremotecontroldoesnotwork.  
Makesurebatteriesareinsertedcorrectly(checkpolarity).  
Replace weak batteries.  
WARNING: Do not touch any metal objects to the battery connectors, as it will put the  
battery in standby mode. To get out of standby mode please connect the battery and  
portable DVD player to AC or DC power.  
Other possibilities:  
Staticorotherexternalinterfere maycausetheplayertofunctionabnormally. Inthiscircumstance  
unplug the power-supply cord from the outlet and plug it in again to reset the player so that  
normal operation can resume. If you are still having problems, then please disconnect the power  
and consult your service center or a qualified technician.  
- 27 -  
 
Specifications  
TFT screen size  
7 inches  
Laser Wavelength  
Video System  
Wavelength: 780/650nm  
PAL/NTSC/MULTI  
20Hz20KHz ±2.5dB  
85 dB  
Frequency Response  
Audio Signal-to-noise Rate  
Audio distortion + noise  
Channel Separation  
Dynamic Range  
-70dB 1KHz)  
70dB 1KHz)  
80dB 1KHz)  
0.2  
1.0  
Analog Audio Out  
Digital Audio Out  
Out Level: 2V±  
, Load: 10K  
Audio Out  
Video Out  
Out Level: 0.5VP-P, Load: 75Ω  
Out Level: 1VP-P±0.2, Load: 75Ω  
Video Out  
Unbalanced Negative  
Power  
AC100-240V50/60Hz  
Power Consumption  
Dimension w/o battery  
Weight w/o battery  
25W  
215 mm x 160 mm x 32 mm  
0.95 kg or 2.09 lbs.  
Compliance with FCC, FDA - cUL listed E209155  
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  
ManufacturedunderlicensefromDolbyLaboratories. “Dolbyandthedouble-Dsymbol  
are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992 -1997  
Dolby Laboratories. All rights reserved.  
For service, support and warranty information, visit www.polaroidelectronics.com or in the US call  
1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.  
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for  
use on the PDV-077PT to Petters Consumer Brands, LLC.  
- 28 -  
 

Pelco Door 2 C2485M A 1 05 User Manual
Philips Baby Monitor SCD491 User Manual
Philips CRT Television 170X4 User Manual
Philips Door Swa 2522 User Manual
Philips Speaker System FW C100 User Manual
Planet Technology Switch SW 504 User Manual
Plantronics Headphones H101N User Manual
Polycom Telephone M7310 User Manual
Porter Cable Saw 90546382 User Manual
PVI Industries Water Heater 1100N300A E User Manual