Polaroid Photo Printer GL10 User Manual

GL10  
Instant Mobile Printer  
User Manual  
 
accept any interference, including interference that may cause undesired operation of this device.  
CAUTION  
RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE.  
BATTERY CAUTIONS  
1. Use only the provided charger with this product.  
2. Only charge the battery as recommended by the instructions.  
3. The battery provided with his product is intended for this product only.  
4. Prolonged use of the printer will result in the battery becoming warm.  
BATTERY WARNINGS  
1. Avoid contact with leaking or a damaged battery.  
2. Do not short battery terminals.  
3. Adult supervision is recommended when product is used by young children.  
4. Avoid areas of excessive heat or moisture.  
5. Do not disassemble the battery.  
This product contains electrical or electronic materials. The presence of these materials  
may, if not disposed of properly, have potential adverse effects on the environment and  
human health. Presence of this label on the product means it should not be disposed of  
as unsorted waste and must be collected separately. As a consumer, you are responsible  
for ensuring that this product is disposed of properly. To nd out how to properly dispose  
customer service number for your country listed in the instruction manual.  
3
 
Product Diagram  
ZINK Paper® door latch  
Photo exit slot  
Battery door  
AC adaptor input  
BACK VIEW  
Power button  
FRONT VIEW  
ZINK Paper® tray door  
Reprint/Reset button Transfer LED indicator  
SIDE VIEW  
USB connectors  
Error LED indicator  
Battery LED indicator  
LED  
Color  
Action  
Communication  
Green  
Solid  
Power on, template disabled  
Power on, template enabled  
Receiving data, printing, cooling  
Orange  
Solid  
Green  
Pulse  
Pulse  
Receiving data, printing, cooling  
with template  
Orange  
Out of paper, non-feed, non-  
compatible paper  
Red  
Pulse (1x speed)  
Paper jam  
Red  
Pulse (3x speed)  
Solid  
Red  
Template error  
Green  
Orange  
Red  
Solid  
Fully charged  
Solid  
Low Battery  
Solid  
Out of battery / Recharge battery  
Charging from AC adapter  
Green  
Pulse  
4
 
Installing and Charging the Battery  
1
Installing and Charging the Battery  
2
Install battery  
3
Replace battery door cover  
To charge the battery:  
1. Install the battery (see above steps).  
2. Connect the AC adapter to the printer and the power source.  
3. Turn on the printer.  
Notes:  
Before using the printer on battery power, fully charge the battery for 2.5 hours.  
You can print photos while plugged into the power source.  
5
 
Installing ZINK Paper®  
1 Press and release latch on the ZINK Paper® tray door.  
2
3
4
Unrwrap the 10-pack of ZINK Paper®.  
Slide the 10-pack of ZINK Paper® into the printer. Make sure  
the blue ZINK SmartSheet® is placed with the barcode down.  
Close the ZINK Paper® tray door.  
Press and hold the POWER button to turn on the printer.  
When you turn the printer on, the ZINK SmartSheet® will  
automatically eject.  
t
®
e
e
h
s
r t  
a
m
S
K
®
N
I
Z
Notes:  
The printer must be empty before refilling. Do not fill the printer with more than  
of ZINK Paper®. Having more than 10 sheets of ZINK Paper® may damage the printer.  
Avoid bending the ZINK Paper®.  
one 10-pack  
Only hold the ZINK Paper® by its edges; avoid touching the printing surface with your fingers.  
If the warning LED is flashing, push the Reprint button and release after 3 seconds.  
6
 
Printing: Camera Cell Phone  
Passcode: 6-0-0-0  
The following is an example for connecting to the printer and print  
your images. The terminology used in your cell phone may be different.  
1. Select the image you would like to print from the stored images on your camera cell phone. In the  
“options” menu, select “send via Bluetooth.” Search for devices and select the Polaroid printer and print.  
2. If you are unable to print from “send via Bluetooth,” select “connectivity” or “Bluetooth” under the  
“settings” or “tools” menu. Search for devices and select the Polaroid printer. Once paired, go back  
to stored images and select the image you want to print. In the “options” menu, select “beam” or  
“send via Bluetooth”. Select the Polaroid printer and print.  
3. If your camera cell phone does not include “send via Bluetooth” under the “options” menu, select  
the image you want to print. Select the “options” menu and select “print via Bluetooth”. Search for  
devices, select the Polaroid printer, and print.  
For Android™ phones, download the free Polaroid Grey Label app from the Market to add cool effects  
to your photos before printing.  
Printing: Computer  
instructions for printing from your Windows or Mac computer.  
*USB cable not included.  
Reprint Last Image  
If the printer has not turned off, you may reprint the last image printed. Push the Reprint button and  
release after 3 seconds.  
7
 
Printing: Digital Camera  
For specific print directions for your digital camera, please review  
your digital camera user’s manual or manufacturer’s website.  
The following is an example for connecting to the printer and  
print your images. The terminology used in your camera may  
be different.  
1. Connect your digital camera and printer to determine if a print option or printer icon is  
automatically displayed on the camera screen.  
2. If no print option appears, select “menu” and navigate to confirm that PictBridge is enabled. Note:  
if “USB” is displayed under “settings” then PictBridge is NOT enabled.  
3. Once PictBridge is enabled, select the image you want to print and follow the on-screen  
instructions to print.  
Notes:  
Do not disconnect the USB cord until entire printing process is complete.  
Do not turn off the printer while printing.  
Do not open ZINK Paper® tray door while printing.  
To print the date on your photo, ensure the Date Stamp feature on your digital camera is enabled.  
Printing with Borders  
The GL10 prints full bleed by default.  
To enable the Polaroid Classic Border Logo format:  
1. Press and hold the “Reprint” button for 5 seconds.  
2. The  
LED will change from green to orange.  
To print without the Polaroid Classic Border Logo format:  
1. Press and hold the “Reprint” button for 5 seconds.  
2. The  
LED will change from orange to green. LED  
border  
no border  
will change from green to orange.  
printer application and instructions for creating your customized border.  
8
 
Troubleshooting  
Problem  
Solution  
The photo has streaks  
DO NOT: Send another image  
to be printed.  
DO: Turn oꢀ the printer. Open the  
ZINK Paper® tray door and remove  
the ZINK Paper®. Place one blue ZINK  
SmartSheet® (with the barcode facing  
down) in the paper tray. Close the  
ZINK Paper® tray door and turn the  
printer on. The ZINK SmartSheet® will  
automatically eject. Open the ZINK  
Paper® tray door and reload the ZINK  
Paper®.  
The paper jammed before printing  
(nothing has been ejected)  
DO NOT: Send another image  
to be printed.  
DO: Open the ZINK Paper® tray door.  
Check to see if there is ZINK Paper® in  
the tray. If so, ensure the ZINK Paper®  
is loaded correctly. Press the “Reprint”  
button to resume printing.  
The paper jammed while printing (part  
of the image has already ejected)  
DO NOT: Pull out paper.  
DO: Turn oꢀ the printer. Wait 5  
seconds, turn the printer back on.  
Printer will eject current photo. To  
reprint, resend your photo to the  
printer.  
If all else fails…  
DO: Turn oꢀ the printer. If the printer  
will not power oꢀ, disconnect the AC  
adapter. Remove the battery cover  
and the battery. Replace the battery  
and battery cover. Turn on the printer.  
Polaroid, Polaroid & Pixel, Polaroid Classic Border Logo and Polaroid Grey Label are trademarks of PLR IP Holdings, LLC, used  
under license. All other trademarks are the property of the respective owner, who has not sponsored, endorsed, or approved  
this product. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturer’s Warranty or support.  
Distributed By: C&A Licensing, LLC, 2 Bergen Turnpike, Ridgefield Park, NJ 07660  
©2013 All Rights Reserved  
The ZINK® Technology and ZINK® trademarks are owned by ZINK Imaging, Inc. Used under license.  
9
 

Peerless Industries Headphones CMJ 300 User Manual
Peerless Industries Whiteboard Accessories A100IWBMOUNT User Manual
Pentax Digital Camera Optio A10 User Manual
Philips Battery Charger SCB5375 05 User Manual
Philips DVD Player DVD707 User Manual
Philips Flat Panel Television 19MD350B User Manual
Philips Portable Speaker SBA1620 79 User Manual
Polycom Network Router 2100 User Manual
Poulan Lawn Mower 190781 User Manual
ProForm Home Gym PFEL87075 User Manual