Polaroid DVD Player PDV 0820T User Manual

8” Portable DVD Player  
PDV-0820T  
Operation Manual  
20040928  
- 1 -  
 
Important Safety Instructions  
7. Protectthepowercordfrombeingwalked  
The lighting flash with arrowhead symbol,  
alertstheusertodangerousvoltagewhich  
could cause electric shock.  
on or pinched, particularly the plugs,  
convenience receptacles, and  
the point where they exit from the  
machine.  
The exclamation point indicates to the  
user to read important operating  
and maintenance instructions in the  
manual.  
8. Only use attachments/accessories  
specified by the manufacturer.  
1. Readandheedalltheseinstructionsand  
warnings,keepthemanualbookforfuture  
use.  
9. Useonlywithcart,stand,tripod,bracket,  
or table specified by manufacturer, or  
sold with product. When cart is used,  
use caution when moving cart/product  
combination to avoid tip-over injury.  
10. Unplug the product during lightning  
stormsorwhenunusedforlongperiods  
of time.  
2. Do not operate the product near water  
or expose it into rain or moisture.  
3. Clean only with dry cloth, and do not  
block any ventilation openings or holes.  
Install according to the manufacturers  
instructions.  
11. Servicing should be referred to qualified  
service personnel and is required when  
producthasbeendamagedinanyway,  
such as; damaged power-supply cord  
or plug, objects have fallen into the  
product, exposed to rain, moisture or  
spills, item was dropped or doesn’t  
operate normally.  
4. Maintain well-ventilated conditions  
around the product, avoiding heat. Do  
notputproductonbed,sofaoranything  
that blocks ventilation.  
5. Do not install near any heat sources  
suchasradiators,heatregisters,stoves  
or other apparatus including amplifiers  
that produce heat.  
12. Do not expose product to dripping or  
splashing.Objectsfilledwithliquids,such  
as vases, should not be placed on the  
product.  
6. Must be plugged into a polarized or  
grounding type plug. A polarized plug  
hastwobladeswithonewiderthanthe  
other. A grounding type plug has two  
bladesandathirdgroundingprong.The  
widebladeorthethirdprongisprovided  
foryoursafety.Iftheprovidedplugdoes  
not fit into your outlet, consult an  
electricianforreplacementoftheobsolete  
outlet.  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
2. DANGER: Visible laser radiation when open and  
interlock failed or defeated.  
exposure to beam.  
Avoid direct  
3. CAUTION: Do not open the top cover. There  
are no user service-able parts inside the unit.  
Leave all servicing to qualified service personnel.  
This unit complies with FDA regulation for radiation  
control of laser products.  
- 3 -  
 
Precautions with Moisture  
Under the following circumstances, moisture may appear on the lens of the product,  
which is the most sensitive part of the DVD player:  
The DVD player is suddenly moved from a cold place to a warm place.  
A room is heated while the DVD player starts operating, or the DVD is placed  
by an air-conditioner.  
In the hot summer season, the DVD player is moved from an air-conditioned  
room to a hot, damp place to be used.  
The DVD player is being operated in a damp place.  
If moisture appears on the player, discontinue use.  
If the player is operated under said conditions, or the disc is loaded, certain  
interior components could be damaged.  
Take disc out, plug power in and power up the DVD player for two to three  
hours to let it dry.  
- 4 -  
 
Function Features  
1. EXCELLENT SOUND  
8. ON-SCREEN DISPLAY  
On-screen displays in your choice of  
English/Spanish/French.  
Dolby Digital output for great sound.  
2. HIGH RESOLUTION  
9. AUDIO OUT  
MPEG2decodingformatachievesmorethan  
500 lines of horizontal resolution.  
3. SPECIAL FUNCTIONS  
Audio output terminal for connection to  
audio amplifiers.  
10. EARPHONE OUTPUT  
Supports multi-angle, excessive language  
caption and parental-lock.  
Letsyoulistentomoviesor music without  
disturbing others.  
4. COMPATIBILITY  
11. REVOLVING LCD SCREEN  
Turn the screen 180 degrees and then flip  
it down so the screen is facing up like  
a picture – ideal for viewing while its in  
your lap!  
Plays DVD, CD, CD-R, CD-RW, MP3 and  
Picture CD discs.  
5. PARTICULAR PERFORMANCE  
Multi-speed, fast forward, fast backward,  
slowplayandstepplayback,repeatplayback  
and programming playback.  
12. SWITCHING POWER ADAPTER  
The supplied adapter automatically adapts  
to the voltage requirements in nearly any  
country.  
6. SEARCH BY TIME  
Search for a certain time on a disc.  
7. LAST MEMORY PLAYBACK  
It remembers where you last stopped.  
DVD players and discs are coded by region. These regional codes must match the  
discs they play. If the codes don’t match, the disc won’t play.  
This players code is region 1.  
This product incorporates copyright protection technology that is protected by  
methodclaimsofcertainU.S. patentsandotherintellectualpropertyrightsowned  
byMacrovisionCorporationandotherrightsowners.Useofthiscopyrightprotection  
technology must be authorized by Macrovision Corporation, and is intended for  
homeandotherlimitedviewingusesonlyunlessotherwiseauthorizedbyMacrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
- 5 -  
 
Screen and main panel  
Unit drawing  
1. Power switch  
2. Disc tray cover  
3. Open  
15. BRIGHT up/down  
16. Speaker  
17. Rotate button  
Opens the disc tray  
4. Remote sensor  
5. Direction buttons  
Selects menu items  
6. Prev skip button  
Skips to previous chapter/track.  
7. Next skip button  
Skips to next chapter/track.  
8. ENT button  
Rotates the screen picture  
18. LCD screen  
19. Latch hook  
20. COLOR up/down  
Adjusts the screen colors  
21. MODE button  
Presstotogglebetween3display  
sizes: normal (4:3), widescreen  
(16:9), and widescreen stretched  
(16:9).  
Confirms selections  
9. AUDIO button  
22. LCD Screen  
Choose AUDIO languages  
10.STOP button  
Stops play back  
11.PLAY/PAUSE button  
12.MENU button  
20” TFT LCD Screen can be rotated  
180 degrees and folded flat (Refer  
to Page 25 for details).  
13.Title button  
Displays DVD titles  
14. INFO button  
Press for detailed information.  
Keep pressing to retreat.  
- 6 -  
 
Screen and main panel  
Right side  
1. Earphone volume adjusting knob  
Used to adjust the earphone and speaker volume.  
2. Earphone jack  
HI-FI earphone output (turn down the speaker volume when connecting)  
3. Audio output/input jack  
4. Video output/input jack  
5. Switch position between AV IN’ and AV OUT’  
IN means the player is in audio and video input mode.  
OUT means the player is in normal playback mode.  
6. Direct current 12V input jack  
Left side  
1. Earphone jack  
- 7 -  
 
Remote Control  
1. PWR button  
4. Direction buttons  
Press to select menu items.  
5. ENTER button  
Press to enter standby mode.  
2. INFO button  
Press for detailed information on disc.  
Pressagaintoremoveinformationfrom  
screen.  
Press to confirm items or setting.  
6. SETUP button  
PresstoaccesstheDVDplayerssetup  
menu.  
3. TITLE button  
Press to display CD titles (if present)  
Press again for random play  
7. 0-9 number buttons  
Selects track numbers  
.
- 8 -  
 
Remote Control  
8. PREV SKIP button  
Presstoenterbeginningofcurrenttrack.  
Press again for previous track.  
9. NEXT SKIP button  
Press to go to next chapter.  
10. SUBT button (DVD use)  
Press to select a subtitle language  
or to turn subtitles off.  
17. STOP button  
Press once to stop playback  
Press PLAY button to resume  
Press STOP twice to stop playback  
completely.  
18. PLAY button  
Press to begin playback.  
19. GOTO button  
11. ANGLE button (DVD use)  
Pressto access various camera angles  
(when available on your DVD)  
12. A-B button  
Presstoselectthedesireddiscstarting  
time, track or title.  
20. +10 button  
Select numbers greater than 9 by  
pressing the (+10) button first, then an  
additional number.  
Press to mark a segment to repeat  
between A and B.  
13. ZOOM button  
21. FWD SCAN button  
Press to search forward.  
22. REV SCAN button  
Press to search backward.  
23. SLOW button  
Press to cycle through zoom function.  
14. REP button  
Press to repeat a chapter, track, title,  
or all content.  
15. MENU button  
For slow forward or slow rewind.  
24. AUDIO button (DVD use)  
Press to access available audio  
languages  
Press to select the disc menu.  
16. PAUSE button  
Press to pause playback.  
Press PLAY button to resume.  
- 9 -  
 
Connections  
Connecting to a TV  
Audio/video connections  
Always ensure that the DVD player, TV and any other electrical equipment that you are  
connecting to the DVD player is turned off and unplugged from the power supply.  
The easiest way to connect the DVD player to a television is via the supplied Audio/Video  
connections. Connect the audio/video cable from the DVD player to the TVs audio/video  
inputs.  
Connecting to an Amplifier with Dolby Digital Decoder  
The DVD player can be connected to an AV amplifier with a Dolby digital decoder via  
theDigitalOpticaloutput. PleaserefertoyourAudioequipmentsmanualbeforeconnecting.  
- 10 -  
 
Playback Preparations  
Using the Remote Control  
1. Refer to the drawing, take the back cover off of the remote control and remove  
the empty battery receptacle.  
2. Prior to shipping, a separating film was applied to the battery. Remove this film.  
3. Insert the battery into the receptacle and insert the receptacle into the remote.  
4. For best results, aim the remote directly at the players receiving window. Stay  
within 15 feet and angles of 60 degrees or less.  
5. Under normal use the battery will last for one year.  
6. Remove battery during storage or when you aren’t using the DVD for long periods  
of time.  
- 11 -  
 
Playback Preparations  
Disc Formats Supported by this Player  
PLAYBACK TIME/  
PLAYABLE SIDES  
DISC LOGO  
DIAMETER  
133 min (SS-SL)  
242 min (SS-DL)  
266 min (DS-SL)  
484 min (DS-DL)  
41 min (SS-SL)  
12cm  
DVD  
75 min (SS-DL)  
8cm  
82 min (DS-SL)  
150 min (DS-DL)  
12cm  
74 min  
CD  
8cm  
20 min  
MP3  
12cm  
600 min  
The operating method of some DVD discs is specified by the software maker. Please  
refer to the instruction manual of the disc.  
The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback  
of CD-R or CD-RW discs created on a computer requires proper formatting and finalization  
of the disc for audio playback. Some computers and/or software programs may not be  
capable of creating compatible discs.  
Disc Terminology  
Title  
Generally, pictures or music compressed on a DVD are divided into several sections,  
called “titles”.  
Chapter  
Some discs break titles into smaller story sections called chapters. Usually, chapters are  
numbered so they can be found easily during a search.  
Track  
A picture or music segment on a CD. Each track is numbered so it can be found easily  
during a search.  
- 12 -  
 
Playback Preparations  
Using the Power Adapter  
The DVD player is powered via the switching power adapter or the battery pack (both  
are included). Directions for connections are found below:  
1. Connect the AC adapter to the DVD player in the slot marked “Power In”.  
2. Connect the rabbit joint end of the AC adapter to the power cord.  
3. Plug the two-prong end of the power cord to a grounded electrical socket.  
4. When you want power down, turn off the players power off first, then unplug the  
power supply to prevent malfunctions.  
Operation  
1. Make your power connections.  
2. Lift up the screen on the DVD player.  
3. Switch “POWER” to the “ON” position.  
4. Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).  
5. Press the “Open” button to open the disc tray cover.  
6. Put disc into the tray house with the printed side up.  
7. Gently push down and close the disc cover.  
- 13 -  
 
Power Supply  
Using and Charging the Battery Pack  
Charge the Battery Pack before using it the first time. Charging time is normally about  
4 hours. Do not charge the Battery Pack more than 8 hours as it could reduce service  
life. Normally, the Battery Pack can be charged approximately 300 times. When fully  
charged, the Battery Pack delivers 2.5 hours of continuous power.  
Battery Pack should be fully charged before initial use!  
1.Attaching the Battery Pack  
Turn the player upside down on a smooth, clean  
surface. Direct the battery so that the battery  
contactsandthefiveplastictabsarealignedwith  
the matching contacts and tab recesses on the  
player.  
2.Lock the Battery Pack to the Player  
With one hand on the player to prevent it from  
moving, push the battery pack on to the player  
then slide the Battery Pack toward the front of  
the Player until you hear it click and lock into  
place.  
3.Charging the Battery Pack  
3
Plug the Power Adapter into the Players DC-IN  
12 V Jack (located on Right Side of Player). Plug  
theotherendofthePowerCordintoahousehold  
wall Power Outlet.  
Recommended Recharging and Charging Times  
Your new battery should be fully charged before it is used for the first time. Charging  
timeisnormallyabout4hours. Afullychargedbatterydelivers2.5hoursofuse. Therefore,  
we recommend that you only charge the battery when the battery is down to its last  
hour of charge or completely out of power. Unnecessary charging of the Battery Pack  
will reduce service life. When the Battery Pack is being charged, the battery indicator  
will turn red. After charging is complete, the red light will turn to green.  
- 14 -  
 
Power Supply  
Detaching the Battery Pack  
Detaching the Battery Pack from the unit:  
If the player is not going to be used for a long period of time, we recommend that  
you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming  
some power in STANDBY mode. This could lead to over discharging the battery. Make  
sure the power is turned off before detaching the Battery Pack. After detaching the battery  
pack, take care when handling the unit.  
1.Slide and hold in position.  
Press the tab towards the front of the unit. Hold  
the tab in the up position.  
2.Taking off the Battery Pack  
Gently slide the Battery Pack toward the back of the  
Unit. Carefully lift the Battery Pack from your player.  
Using a Car Adapter  
You can use Car Adapter while in a vehicle:  
Connecting the Car Adapter Power Plug into the units  
Power Jack and the other end to the Vehicle Cigarette  
Lighter Socket:  
Quick Tips  
Do not operate the unit or view video software while driving a vehicle.  
Place the unit in a secure position for viewing.  
Do not leave battery attached when using car adaptor as power supply.  
Do not play a DVD while using the car adaptor to charge the battery.  
Using Headphones  
Using Headphones while you are in a quiet area:  
Connecting Headphone Connector into right side of the  
units Headphone Jack:  
Quick Tips  
Excessive loud usage of headphones could damage your hearing.  
Turn down the Volume before you connect the headphones, then raise the volume  
to suit your level.  
Sound from the units external speaker will cease when headphones are connected.  
- 15 -  
 
Power Supply  
About Rechargeable Battery  
Your portable DVD player comes with a lithium ion rechargeable battery that attaches  
to the bottom of the player.  
Rechargeablebatteryproperties:7.4Volts, withacapacityof4200mAh, interiorlithiumionic  
electric circuit protection for recharge and discharge.  
If the battery is not used it will automatically discharge gradually within one month.  
If the battery loses power during play, stop playing the DVD, otherwise damage  
may occur.  
Working conditions and precautions:  
Battery should only be used and charged when temperatures are between 32-95F.  
Never put the battery in fire or water.  
Do not expose the battery to high temperatures or store in hot, sunny places.  
Maintain well-ventilated conditions around the product, avoiding heat.  
Don’t put the product on bed, sofa or anything that may block ventilation to the  
product.  
Don’t use metal to link positive pole to negative.  
Do not open the battery.  
Do not leave battery attached when using alternative power source such as car  
adaptor.  
Detach battery when not in use.  
- 16 -  
 
Play DVD  
Please read these instructions carefully before using your DVD player for the first  
time.  
1. Turn on the players power by switching the POWER switch on the side of the  
player to “ON”.  
2. Press OPEN button on front panel to open the disc cover.  
3. Remove the protective lens cover.  
4. Load disc with the label facing up to prevent damage to the player or disc.  
5. Close the disc cover. The player will automatically search for the disc and when  
it finds it, play will begin.  
Warning: Do not play poor quality discs to prevent damage to the lens.  
Start to Playback  
1. Press the PLAY button on the remote control.  
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select a scene.  
3. Press ENTER or PLAY button to start playback.  
Pause  
1. Press the PAUSE button on remote to pause.  
2. Press the PLAY button to resume normal playback.  
Zoom  
1. Press the ZOOM button on remote to cycle through to different zoom settings.  
2. Normal – 2x – 3x – 4x – 1/2 – 1/3 – 1/4.  
3. While in zoom mode use direction keys to move around to different positions  
on the picture.  
- 17 -  
 
Playing a DVD  
Stop  
During playback, press the STOP button on the remote control to stop playing.  
Press the PLAY button, then the player will play from the point where it stopped.  
Mode  
During playback, press the MODE button on the control panel to change the aspect  
ratio on the screen.  
Title Menu  
1. Press the TITLE button on the remote control during payback. The title menu  
will appear on the TFT screen.  
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select the title or  
disc option you wish to play.  
3. Press the PLAY button to start playback.  
NOTE: Title and Menu are only available for DVD discs.  
Previous and Next  
1. Press the PREV button on the remote control, and playback will start from  
the previous track.  
2. Press the NEXT button on the remote control, and playback will start from  
the next track.  
- 18 -  
 
System Setup  
General Set-Up  
Change the default settings to your own preferences.  
1. Removethedisc fromtheDVDdriveandpressthe ‘SETUPbuttonontheremote  
control, the settings menu will appear. It includes General Setup, Speaker Setup,  
Dolby Digital Setup, Video Setup and Preference setup.  
2. Press ꢄꢅꢆꢇ (direction buttons) on the remote control to select a category.  
3. All the items in the category will appear on the TV screen. Press the ‘ENTER’  
button to confirm your selection.  
Category  
1. When you enter a category all the items under this category will appear, and  
the items placed in the middle (or highlighted) will be the current set up.  
2. Press(rightdirectionbutton)ontheremotecontroltoselectthecorrectcategory.  
3. Press the direction button to select your preference. The item you select will  
be highlighted.  
4. Press the ‘ENTER’ button for confirmation.  
5. Press (left direction button) to enter the other setup menu.  
General Setup  
The general setup is shown as follows:  
TV Display  
Select Normal/PS or Normal/LB when a 4:3 TV is connected.  
Select Normal/PS, when playing a wide screen picture, the left and right edges  
will be cut off. Select Normal/LB, display images with marking bars above and below  
the picture.  
Angle Mark  
If the scene was shot from multiple angles, then you can easily change the camera  
angle of the scene you are watching. When switched on, the disc will indicate if  
alternative viewing angles are available.  
On Screen Displays (OSD)  
TherearefivekindsofdifferentOSDlanguagesforselection.You canselectitaccording  
to your preference.  
- 19 -  
 
System Setup  
SPDIF Output  
This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital  
audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is  
Dolby Digital, then the digital audio output is also Dolby Digital. Select ‘SPDIF/PCM’  
when you connect with a 2 channel digital stereo amplifier.  
Captions  
You can choose captions on or off on screen during playback.  
Screen Saver  
When activated, the screen saver automatically works if there has been no operation  
for a period of time.  
Speaker Setup  
Downmix  
SelectLT/RTinDOWNMIX,thentheplayerwilloutputmixedaudioinawayprescribed  
by Dolby. Select “Stereo”, then the player will output a stereo signal.  
Dolby Digital Setup  
Dual Mono  
The function is used to set the output mode of channel left/right, stereo and mixed  
sound.  
Dynamic  
Usethisitemtoadjustlineardynamiccompressionratetogetdifferentsignalcompression  
Video Setup  
Sharpness  
Use this item to adjust sharpness setting.  
Brightness  
Use this item to adjust brightness level.  
Contrast  
Use this item to adjust contrast level.  
- 20 -  
 
System Setup  
Preferences  
TV Type  
Most countries around the world use one of the following TV broadcast standards:  
NTSC, PAL and SECAM. NTSC is used in North America and many Asian countries  
including Japan. PAL is used in nearly every other country. France uses SECAM.  
Set your DVD player accordingly, or to be safe, set it on multi.  
Audio, Subtitle, Disc Menu  
These settings allow you to listen or read subtitles of a DVD in your choice of  
English, Spanish or French.  
Parental Control  
DVD discs equipped with the child lock function are rated according to their contents  
and settings vary from disc to disc. Depending on the disc, you can replace or  
lock out violent scenes, or lock out playback of the disc altogether. Access parental  
control on the sub-menu by pressing ꢄꢅꢆꢇ (direction buttons) on the remote  
control, then press the ENTER button. An interactive menu will appear.  
Password  
Parentalcontrolfeaturesarepasswordprotected.Chooseapasswordyouwillremember  
easily or write it down. The original password is 1369.  
Default Reset  
Use this function to reset all the settings.  
Version  
Displays software version information.  
NOTE: this menu function is not available while a disc is playing.  
Audio  
DVD discs contain up to 8 audio bit streams. For Example: English, French etc.  
To select the audio bit stream you prefer press the AUDIO button on the remote  
control during playback. The DVD player will play the next audio bit stream every  
time you press the AUDIO button in succession.  
NOTE: This function is only available for discs that have actually recorded several  
of the audio bit streams.  
- 21 -  
 
Playback Functions  
Fast Forward & Rewind  
Press the and buttons to active fast forward or rewind.  
Slow Forward & Rewind  
Press the SLOW button to slow forward or rewind.  
Repeat  
Repeatatitle, chapterortrack. PresstheREPbuttonontheremotecontrol. Continually  
pressing the REPEAT button will display a menu as follows: Chapter, Title and All.  
You can temporarily mark your own section of a DVD that you would like to play  
repeatedly. You do this by marking the start and the end of the section using the  
A/B button. During playback press the A-B button on the remote control at the  
beginning of the segment (point A) you wish to play repeatedly. Press the A-B button  
again at the end of the segment (point B).  
TheDVDplayerwillautomaticallyreturntopointAandrepeatplaybackoftheselected  
segment. (A-B). To resume normal playback, press the A-B button again.  
Subtitle  
A DVD disc can be recorded with up to 32 subtitles.  
Press the SUBT button on the remote control, the mode of subtitles will recycle  
as follows: SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle  
2 appears on the screen.  
SUBTITLE N/N: Subtitle N (N is the total number of subtitles that the current disc  
contains) appears on the screen. SUBTITLE OFF: No subtitle.  
NOTE: This function is available on DVD disc that recorded with multi-subtitles.  
Angle  
If the scene was recorded from multiple angles, you can easily change the camera  
angle of the scene you are watching.  
Press the ANGLE button on the remote control during playback. Playback will shift  
to another angle. If the disc menu gives the options of angles items, you can switch  
angles for viewing by pressing the number buttons on the remote control.  
NOTE: This function is only available if a disc is a multi-angles recorded disc.  
- 22 -  
 
Playback Functions  
Search by time  
You can use the GOTO button to search by time, namely to play from a specific  
time. During DVD playback, press the GOTO button once and TV screen will display  
the title or chapter, then you can use number buttons to select any one of them.  
Press the GOTO button twice, then you can use number buttons to input the time  
you desired (hour, minute, second), and the player will play from the inputted time.  
NOTE: This function is only available for DVD discs.  
Resume Playback  
Press the STOP button at the location if you wish to interrupt playback. The player  
memorizes the location where playback was stopped.  
Press the PLAY button to resume normal playback. The player resumes playback  
from the location where you stopped playback. This function does not operate if  
the disc is removed.  
Press the STOP button twice or open the disc tray, playback will then be stop and  
when PLAY button is pressed, the playback will begin from the beginning of disc.  
Playing an MP3  
MP3 is the third audio compression format of international standard MPEG, which  
compresses the audio signal at the rate of 12:1. Using MP3 format, one disc can  
record more than 600 minutes music, the sound quality is similar to that of CD  
discs.  
TherearemanydifferentformatsforstoringMP3songs.Usually,oneMP3discincludes  
many folders (directories) and every folder includes several files (songs).  
In stop status, use the LEFT/RIGHT directional navigation arrows to move cursor  
to “PLAY MODE” column, and use the UP/DOWN directional navigation arrows to  
select the play mode. Press the LEFT/RIGHT directional navigation arrows to confirm.  
Similarly, use the UP/DOWN directional navigation arrows to select the directory you  
want and press the ENTER button to enter it. Press the PLAY button to play the  
song you selected. In playing status, you can use the and buttons to select  
other songs.  
NOTE: The player can only output stereo signal when playing MP3 discs.  
There is no search by time and slow playback function for MP3 discs.  
- 23 -  
 
Playback Functions  
Playing a JPEG  
JPEG is a common picture format that has few bytes and low loss rate of picture.  
Hundreds of pictures can be stored in a disc in this format. In order to realize real  
digital album, use film to make ”PICTURE CD”, namely JPEG format.  
OPERATION  
Normal Playback  
Load a JPEG disc in. After reading the disc, OSD will display the menu (the left  
side is the main menu and the right side is its submenu). Use the direction buttons  
and ENTER button to choose items.  
Many discs have other items besides pictures.  
Use left/right button to move cursor to playback mode column, use the up/down  
button to confirm.  
Picture Rotation  
It can be operated when the picture is normally displayed. Once another picture  
is selected, rotating function will not be effective.  
There are four kinds of rotational modes, you can use direction button to choose:  
LEFT ----- Inversion/Normal  
RIGHT ----- Enantiomorphism/Normal  
UP  
----- Rotate up  
DOWN------ Rotate down  
Zoom of Picture  
ZOOM button is used to turn on/off zoom and move function.  
As the zoom function is turned on, use the fast forward or reverse scan button  
to display relevant zoom proportion. Use the direction buttons to change and enlarge  
the point of the picture ratio.  
When zoom function is not available, the picture will display normally. Press the MENU  
button to return to the root menu.  
Press the STOP button to activate preview mode.  
NOTE: Influenced by making method, some JPEG discs can only be played normally  
with no rotate or zoom functions.  
- 24 -  
 
Special Features of the Revolving LCD Screen  
The revolving LCD screen is one of the outstanding features about this product. You  
are suggested to take the following steps for proper operation.  
1.Openthescreencovertoposition(A)asshown  
in left figure at which the screen is vertical  
to the operation panel.  
Pos A  
2. Revolvingthescreenhorizontallyaboutitsaxis  
in the clockwise only. The maximum revolving  
degree is 180 (position C) at which you will  
hear a click and the screen faces backward.  
Ifyouwanttoreturntoinitialposition(A)please  
revolvescreencounterclockwiseuntilitclicks.  
Pos B  
3.Youcanrotatethescreenverticallyfromposition  
C to operation panel as indicated in left fig.  
Pos C  
4. Thefinalrotatingposition(positionD)atwhich  
the screen facing upward and back to operation  
panel.  
Pos D  
- 25 -  
 
Connecting to a Gaming System  
What you’ll need:  
Two pigtailed RCA audio cables (the ones with the red and white ends)  
Two RCA video cables (the one with the yellow end)  
Three RCA couplers (not included)  
NOTE: One set of audio and video cables are included with your portable DVD player.  
Check to see if your game system also includes a set of audio and video cables.  
1. Using the two pigtailed RCA audio cables and two RCA couplers, connect both  
cables together making sure red goes to red and white goes to white (with an  
RCA coupler serving as a bridge between each connection)  
2. Connect one end of the audio cable into the Audio/Optical Out port on your  
portable DVD player and the other end into the Audio/Optical Out port on your  
game system.  
3. Using the two RCA video cables (the ones with the yellow ends) and one RCA  
coupler, connect the cables together (with the RCA coupler serving as a bridge  
between the two cables)  
4. Connect one end of the video cable into the Video Out port on your portable  
DVD player and the other end into the Video Out port on your game system.  
5. Move the AV switch on your portable DVD player to the “IN” position.  
6. You are ready for action!  
- 26 -  
 
Carrying Case  
Your Portable DVD Player includes a sturdy carrying bag/headrest mount for  
the ultimate in portable convenience! The bag/mount is easy to attach and  
fits on nearly any car or truck headrest (see photo above).  
- 27 -  
 
Care of Discs  
How to hold discs  
Cleaning Care  
When loading or removing discs, try not  
to touch their playing surfaces.  
Use a soft, dry cloth for cleaning. For  
stubborndirt, soaktheclothinadetergent  
solution; ring well first and wipe. Use a  
dry cloth to wipe it dry. Do not use any  
volatile agents such as benzine or paint  
thinner, as they may damage the surface  
of the player.  
Lens cleaner  
Cleaning  
Theplayerspickuplensshouldnotbecome  
dirty under normal use, but is for some  
reasonitshouldmalfunctionduetosoiling,  
contact your nearest WACA authorized  
service center. Lens cleaners are  
commercially available, but special care  
shouldbeexercisedintheirusesincesome  
may cause damage to the lens.  
Fingerprints or other dirt on the disc may  
affect sound and picture quality.  
To clean your discs, use a soft clean cloth  
to wipethem. If necessary, moisten a soft  
cloth with diluted neutral detergent to  
remove heavy dirt or fingerprints.  
Donotwipeinacirculardirection(Concentric  
scratchesinthediscgroovetendtocause  
noise.)  
Gently wipe from the inside to the outer  
edge.  
- 28 -  
 
Troubleshooting  
Symptom  
What To Check  
Make sure the AV IN/OUT switch on the side of the  
player unit is in the OUT position for standard play.  
Make sure the disc cover is closed.  
Make sure a disc is loaded.  
Make sure the disc isn’t loaded upside down.  
Disc should be clean, not dirty or warped.  
Players region code should be the same as region code  
of DVD disc.  
The player cannot play.  
Haswatercondensationhasoccurred?Ifithas, remove  
the disc and keep the player powered up for at least  
two hours.  
Make sure system connection is correct.  
Make sure the speakers are turned on.  
There is no sound.  
Make sure the sound setup of DVD disc is correct.  
If the disc is dirty or warped? Clean or replace disc.  
Makesureunitis turnedonandin correctvideomode.  
Make sure your system connection is correct.  
There is no picture.  
Poor AV performance.  
If the disc is dirty or warped? Clean or replace disc.  
Make sure the player is not in A-B repeat status.  
Press A-B button to cancel it A-B repeat status.  
If the disc is dirty or warped? Clean or replace disc.  
Cannotcontinuetoplayandplay  
a section repeatedly.  
Make sure there aren’t any obstructions between the  
remote control and the player.  
Make sure you are pointing the remote control at the  
player.  
Theremotecontroldoesnotwork.  
Makesurebatteriesareinsertedcorrectly(checkpolarity).  
Replace weak batteries.  
WARNING: Do not touch any metal objects to the battery connectors, as it will put the  
battery in standby mode. To get out of standby mode please connect the battery and  
portable DVD player to AC or DC power.  
Other possibilities:  
Staticorotherexternalinterferemaycause theplayertofunctionabnormally. Inthiscircumstance  
unplug the power-supply cord from the outlet and plug it in again to reset the player so that  
normal operation can resume. If you are still having problems, then please disconnect the power  
and consult your service center or a qualified technician.  
- 29 -  
 
Specifications  
TFT screen size  
8 inches  
Laser Wavelength  
Video System  
Wavelength: 780/650nm  
NTSC  
Frequency Response  
Audio Signal-to-noise Rate  
Audio distortion + noise  
Channel Separation  
Dynamic Range  
20Hz20KHz ±2.5dB  
85Db  
-70dB 1KHz)  
70dB 1KHz)  
80dB 1KHz)  
0.2  
1.0  
Analog Audio Out  
Video Out  
Audio Out  
Out Level: 2V±  
,
Load: 10Kς  
Out Level:1VP-P±0.2, Load:75ς  
Video Out  
Unbalanced Negative  
Power  
AC100-240V50/60Hz  
25W  
Power Consumption  
Dimension w/o battery  
Weight w/o battery  
8.47” x 6.3” x 1.37”  
0.95 kg or 2.09 lbs.  
Compliance with FCC, FDA - cUL listed E209155  
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential  
unpublished works. © 1992 -1997 Dolby Laboratories.  
All rights reserved.  
- 30 -  
 
For service, support and warranty information, visit www.polaroidelectronics.com or in  
the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call  
01-800-400-2443.  
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and  
licensed for use on the PDV-0820T to Petters Consumer Brands, LLC.  
- 31 -  
 

Peavey Musical Instrument Amplifier 100 EFX User Manual
Pelco Home Security System C1493SM User Manual
Philips CRT Television TP2785C1 User Manual
Philips DVD Player 1080i User Manual
Philips Indoor Furnishings 30188 11 16 User Manual
Philips Work Light ELC 10H User Manual
Pioneer CD Player PDR W839 User Manual
Polycom Conference Phone 3725 63211 002 User Manual
Precision Power Stereo Equalizer DEQ 230 User Manual
ProForm Treadmill PFTL99222H User Manual