Polaroid DVD Player PDV 0800 User Manual

8” Portable DVD Player  
PDV-0800  
Operation Manual  
20040928  
 
Important Safety Instruction  
WARNING: To reduce the risk of fire  
or electric shock, DO NOT expose this  
product to rain or moisture.  
The lighting flash with arrowhead symbol,within an triangle, alerts the user  
to “dangerous voltage” which could cause electric shock.  
Theexclamationpointwithinatriangleindicatestotheusertoreadimportant  
operating and maintenance instructions in the manual.  
IMPORTANT FOR LASER PRODUCTS  
NOTES  
1. CLASS 1 LASER PRODUCT  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation  
2. DANGER:Visiblelaserradiationwhenopenandinterlockfailedordefeated.  
Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user service-able  
parts inside the unit. Leave all servicing to qualified service personnel.  
This unit complies with FDA regulation for radiation control of laser  
products.  
openings. Maintain well ventilated conditions around the product, Do not put product  
on bed, sofa or anything that blocks ventilation. Install in accordance with the  
manufacturers instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the other. A grounding type plug has  
twobladesandathirdgroundingprong. Thewidebladeorthethirdprongisprovided  
for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10)Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,  
or sold with the apparatus. When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip-over.  
13) Unplug the device during lightning storms or when unused for long periods of time.  
14)Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatus  
has been damaged in any way, such as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
- 4 -  
 
Precautions with Moisture  
Under the following circumferences, moisture may appear on the lens of the product,  
which is the most sensitive part of the DVD player:  
The DVD player is suddenly moved from a cold place to a warm place.  
A room is heated while the DVD player starts operating, or the DVD is placed near  
an air-conditioner.  
In the hot summer season, the DVD player is moved from an air-conditioned room  
to a hot, damp place to be used.  
The DVD player is being operated in a damp place.  
If moisture appears on the player, stop operation.  
If the player is operated under these conditions, or the disc is loaded, certain interior  
components could be damaged. Take disc out, plug power in, switch power button on  
the DVD player for two to three hours to dry.  
- 5 -  
 
Function Features  
1. EXCELLENT SOUND  
Continues playing from place stopped.  
8. ON-SCREEN DISPLAY  
Dolby digital delivers great sound.  
2. HIGH RESOLUTION  
On-screen displays in your choice of  
English/Spanish/French.  
MPEG2 decoding format achieves more  
than 500 lines of horizontal resolution.  
3. SPECIAL FUNCTIONS  
9. AUDIO OUT  
Audio output terminal for connection  
to audio amplifiers.  
Supports multi-angle, extra language  
caption.  
10. EARPHONE OUTPUT  
4. COMPATIBILITY  
Convenientforlisteningtomoviesormusic  
in private.  
PlaysDVD,CD,CD-R,CD-RWandMP3  
discs.  
11. REVOLVING TFT LCD screen  
Adjust the screen for custom viewing  
byrevolvingithorizontallyaboutitsaxis,  
or lay it flat with the screen facing up.  
12. SWITCHING POWER ADAPTER  
Automatically adapts to voltage  
requirementsintheUSandothercountries  
5. PARTICULAR PERFORMANCE  
Multi-speed,fastforward,fastbackward,  
slow play and step playback, repeat  
playback and programming playback.  
6. SEARCH BY TIME  
Search for a certain time on a disc.  
7. LAST MEMORY PLAYBACK  
DVD players and discs are coded by region. These regional codes must match  
the discs they play. If the codes don’t match, the disc won’t play.  
This players code is region 1.  
This product incorporates copyright protection technology that is protected  
by method claims of certain U.S. patents and other intellectual property rights  
ownedbyMacrovisionCorporationandotherrightsowners.Useofthiscopyright  
protection technology must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly  
is prohibited.  
- 6 -  
 
Parts Introduction  
DVD Player  
1. Power switch  
14. Bright up/down  
2. Disc cover  
15. Speaker  
3. Open disc tray  
4. Remote sensor  
5. Direction buttons  
6. Prev skip button  
Press to skip to previous chapter/track.  
7. Next skip button  
Press to skip to next chapter/track.  
8. OK button  
For enjoying high quality stereo music.  
16. Rotate button  
The picture can be rotated for viewing.  
17. TFT Liquid Crystal Display  
18. Color up/down  
19. Mode button  
The display works in two modes: normal  
screen (4:3) or wide screen (16:9).  
20. TFT LCDScreen can be rotated 180  
degreesandfoldedflat(RefertoPage  
26 for details).  
9. Pause button  
10. Stop button  
11. Play button  
12. Menu button  
21. Latch hook  
13. Title button  
- 7 -  
 
 
Parts Introduction  
Right Side Panel  
1. Volume adjusting knob  
Used to adjust the earphone and speaker volume.  
2. Earphone jack  
HI-FI earphone output, when connecting this jack, speaker volume is turned off.  
3. Audio output/input jack  
4. Video output/input jack  
5. Switch for AV IN’ and AV OUT’  
Switch to IN to set the player for audio and video input mode.  
Switch to OUT to set the player for normal playback mode.  
6. Direct current 12V input jack  
Left Side Panel  
7. Earphone jack  
- 8 -  
 
Remote Control  
1. PWR button  
5. ENTER button  
Press to enter standby mode.  
2. INFO button  
Press to confirm the items or setting.  
6. SETUP button  
Press for detailed information on the  
disc playing.  
PresstoaccesstheDVDplayerssetup  
menu.  
Press repeatedly to remove information  
from screen.  
7. 0-9 number buttons  
Select numbers by pressing these  
buttons.  
3. TITLE button  
Press to display title menu if present  
on the disc.  
8. PREV SKIP button  
Presstogotobeginningofcurrenttrack.  
Press again quickly to go to beginning  
of previous track.  
Presstoselectrandomplaywhenplaying  
a CD.  
4. Direction buttons  
Press to select menu items.  
- 9 -  
 
Remote Control  
9. NEXT SKIP button  
Press to go to next chapter.  
10. SUBT button  
17. STOP button  
Pressoncetostopplayback.PressPLAY  
button to resume normal playback.  
Pressthebuttontwicetostopplayback  
completely.  
WhenaDVDisplaying, presstoselect  
a subtitle language or to turn subtitles  
off.  
18. PLAY button  
11. ANGLE button  
Press to begin playback.  
19. GOTO button  
Press to access various camera angles  
(iftheDVDdisccontainsmultiplecamera  
angles).  
Presstoselectthedesireddiscstarting  
time, track or title.  
12. A-B button  
20. +10 button  
Press to mark a segment to repeat  
between A and B.  
Select numbers greater than 9 by  
pressingthe(+10)buttonfirst,andthen  
an additional number button.  
21. FWD SCAN button  
Press to search forward.  
22. REV SCAN button  
Press to search backward.  
23. SLOW button  
13. ZOOM button  
Press to cycle through zoom function.  
14. REP button  
Press to repeat a chapter, track, title,  
or all content.  
15. MENU button  
Press to select the disc menu.  
16. PAUSE button  
Press to activate slow forward or slow  
rewind.  
Press to pause playback.  
Press PLAY button to resume normal  
playback.  
24. AUDIO button  
Presstoaccessvariousaudiolanguages  
(iftheDVDdisccontainsmultipleaudio  
languages).  
- 10 -  
 
Connections  
Connecting to a TV  
Audio/video connections  
1. Always ensure that the DVD player, TV and any other electrical equipment you are  
connecting the DVD player to is switched off and unplugged from the power supply.  
2.TheeasiestwaytoconnecttheDVDplayertoatelevisionisviathesuppliedAudio/Video  
connections. Connect the audio/video cable from the DVD playerto the TVs audio/video  
inputs.  
Connecting to an Amplifier with Dolby Digital Decoder  
The DVD player can be connected to an AV amplifier of Dolby digital decoder via the  
Digital Optical output. Please refer to your Audio equipments manual before connecting.  
- 11 -  
 
Playback Preparations  
Usage of Remote Control  
1. Refer to the drawing and remove the empty battery receptacle.  
2. Prior to shipping, a separating film was applied to the battery. Remove this film.  
3. Press the battery into the receptacle and insert the receptacle into the remote.  
4. For best results, aim the remote directly at the players receiving windowwithin  
the range of 15 feet, and angles of 60 degrees.  
5. Under normal use the battery will last for one year.  
6. Remove battery if the device is not to be used for a long time during storage  
- 12 -  
 
Playback Preparations  
Disc Formats Supported by this Player  
The unit can play discs bearing any of the following logos:  
PLAYBACK TIME/  
PLAYABLE SIDES  
DISC LOGO  
DIAMETER  
133 min (SS-SL)  
242 min (SS-DL)  
266 min (DS-SL)  
484 min (DS-DL)  
41 min (SS-SL)  
12cm  
DVD  
75 min (SS-DL)  
8cm  
82 min (DS-SL)  
150 min (DS-DL)  
12cm  
74 min  
CD  
8cm  
20 min  
MP3  
12cm  
600 min  
The operating method of some DVD discs is specified by the software maker. Please  
refer to the instruction manual of the disc.  
TheDVDPlayerwillplaymostrecordable(CD-R)orerasable(CD-RW)CDs,butplayback  
ofCD-RorCD-RWdiscscreatedonacomputerrequiresproperformattingandfinalization  
of the disc for audio playback. Some computers and/or software programs may not  
be capable of creating compatible discs.  
About Disc Terms  
- Title  
Generally, pictures or music compressed on a DVD are divided into several sections,  
or “titles”.  
- Chapter  
The smaller unit of pictures or music in a DVD under the title, usually one title is  
comprised of one or more chapters and each of them is numbered for easy searching.  
Some discs may not have chapters.  
- Track  
A segment of picture or music on a CD. Each track is numbered for searching.  
- 13 -  
 
Playback Preparations  
Usage of Switching Power Adapter  
The player is supplied with a power switching adapter.  
1. Connect AC adaptor to the power jack marked “DC 12V IN” on the side of the  
DVD player.  
2. Connect the rabbit joint end of the AC adaptor to the power cord.  
3. Plug the two-prong end of the power cord to a grounded electrical socket.  
Note: Turn players power off first and then unplug the power adaptor to prevent  
malfunction.  
Pre-operation  
1. Connect the power adapter.  
2. Lift the main cover up to open the player.  
3. Switch “POWER” to the “ON” position.  
4. Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).  
Loading a disc  
1. Press the OPEN button to open the disc cover.  
2. Put disc into the tray with the printed side up.  
3. Close the disc cover.  
- 14 -  
 
Power Supply  
Using and Charging the Battery Pack  
Charge the Battery Pack before using it the first time. Charging time is normally 3-4  
hours. Do not charge the Battery Pack more than 4 hours as it could reduce service  
life. Normally, the Battery Pack can be charged approximately 300 times. When fully  
charged, the Battery Pack delivers 3-4 hours of continuous power.  
Battery Pack should be fully charged before initial use!  
1.Attaching the Battery Pack  
Turn the player upside down on a smooth, clean  
surface. Direct the battery so that the battery  
contactsandthefiveplastictabsarealignedwith  
the matching contacts and tab recesses on the  
player.  
2.Lock the Battery Pack to the Player  
With one hand on the player to prevent it from  
moving, push the battery pack on to the player  
then slide the Battery Pack toward the front of  
the Player until you hear it click and lock into  
place.  
3.Charging the Battery Pack  
Plug the Power Adapter into the Players DC-IN  
12 V Jack (located on Right Side of Player). Plug  
theotherendofthePowerCordintoahousehold  
wall Power Outlet.  
Recommended Recharging and Charging Times  
Your new battery should be fully charged before it is used for the first time. Charging  
time is normally between 3-4 hours. A fully charged battery delivers 3 to 4 hours of  
use. We recommend that you only charge the battery when the battery is down to its  
last hour of charge or completely out of power. Unnecessary charging of the Battery  
Pack will reduce service life. When the Battery Pack is being charged, the battery indicator  
will turn red. After charging is complete, the red light will turn green.  
- 15 -  
 
Detaching Battery Pack  
Detaching Battery Pack from the unit:  
If the player is not going to be used for a long period of time, we recommend that  
you detach the Battery Pack. Even if the unit is powered down, it still consumes some  
power in STANDBY mode and will discharge the battery. Make sure the power is turned  
off before detaching the Battery Pack. After detaching the battery pack, take care when  
handling the unit.  
1.Slide and hold in position.  
Press the tab towards the front of the unit. Hold  
the tab in the up position.  
2.Taking off the Battery Pack  
Gently slide the Battery Pack toward the back of the  
Unit. Carefully lift the Battery Pack from your player.  
Using a Car Adapter  
Using the Car Adapter while in a vehicle:  
ConnecttheCarAdapterPowerPlugintotheunitsPower  
Jack and the other end to the Vehicle Cigarette Lighter  
Socket:  
Quick Tips  
Do not operate the unit or view video software while driving a vehicle.  
Place the unit in a secure position for viewing.  
Do not leave the battery attached when using car adaptor as power supply.  
Do not play a DVD while using the car adaptor to charge the battery.  
Using Headphones  
Using Headphones while you are in a quiet area:  
ConnectingHeadphoneConnectorintorightsideoftheunits  
Headphone Jack:  
Quick Tips  
Excessive loud usage of headphones could damage your hearing.  
Turn down the Volume before you connect the headphones then raise the volume  
to suit your level.  
Sound from the units external speaker will cease when headphones are connected.  
- 16 -  
 
Basic Operation  
Please read these instructions carefully before using your DVD player for the first  
time.  
1. Turn on the players power by switching the POWER switch on the side of  
the player to “ON”.  
2. Press OPEN button on front panel to open the disc cover.  
3. Remove the protective lens cover.  
4. Load disc with the label facing up to prevent damage to the player or disc.  
5. Close the disc cover. The player will automatically search for the disc and when  
it finds it, play will begin.  
Warning: Do not play poor quality discs to prevent damage to the lens.  
Start to Playback  
1. Press the PLAY button on the remote control.  
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select a scene.  
3. Press ENTER or PLAY.  
Pause  
Press the PAUSE button on remote to pause.  
Press the PLAY button to resume normal playback.  
Zoom  
Press the ZOOM button on remote to cycle through to different zoom settings.  
Normal – 2x – 3x – 4x – 1/2 – 1/3 – 1/4.  
While in zoom mode use direction keys to move around to different positions on  
the picture.  
- 17 -  
 
Basic Operation  
Stop  
During playback, press the STOP button on the remote control to stop playing.  
Press the PLAY button and the player will play from the point where it stopped.  
Mode  
During playback, press the mode button on the control panel to change the aspect  
ratio on the screen.  
Title Menu  
1. Press the TITLE button on the remote control during payback. The title menu  
will appear on the TFT screen.  
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select the title or  
disc option you wish to play.  
3. Press the PLAY button to start playback.  
NOTE: Title and Menu are only available for DVD discs.  
Previous and Next  
1. Press the PREV button on the remote control, and playback will start from the  
previous track.  
2. Press the NEXT button on the remote control, and playback will start from the  
next track.  
- 18 -  
 
System Setup  
GENERAL SET-UP  
You canchangethedefaultsettingstocustomizeperformancetoyourownpreference.  
1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote  
control, the settings menu will appear. It includes General Setup, Speaker Setup,  
Dolby Digital Setup, Video Setup and Preference setup.  
2. Press ꢄꢅꢆꢇ (direction buttons) on the remote control to select a category.  
3. All the items in the category will appear on the TV screen. Press the ‘OK’ button  
to confirm your selection.  
Category  
1. When you enter a category all the items under this category will appear, and  
the items placed in the middle (or highlighted) will be the current set up.  
2.Press(rightdirectionbutton)ontheremotecontroltoselectthecorrectcategory.  
3. Press the direction button to select your preference. The item you select will  
be highlighted.  
4. Press the ‘OK’ button for confirmation.  
5. Press (left direction button) to enter the other setup menu.  
General Setup  
The general setup is shown as follows:  
1. TV Display  
SelectNORAML/PSwhena4:3TVisconnected.Thisdisplaysthepicturewithmarking  
bars above and below the picture.  
Select WIDE when a 16:9 wide screen TV is connected.  
2. Angle Mark  
If the scene was shot from multiple angles, then you can easily change the camera  
angle of the scene you are watching.  
ON/OFF  
With this switched on you will be notified if alternative viewing angles are available.  
- 19 -  
 
System Setup  
3. OSD Lang  
There are five kinds of different OSD languages for selection.  
4. SPDIF Output  
This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital  
audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is  
Dolby Digital, then the digital audio output is also Dolby Digital. Select ‘SPDIF/PCM’  
when you connect with a 2 channel digital stereo amplifier.  
5. Captions  
Switches on screen captions on or off during playback.  
6. Screen Saver  
When activated, the screen saver automatically starts if there has been no operation  
for a period of time.  
Speaker Setup  
1. Downmix  
SelectLT/RTinDOWNMIX,thentheplayerwilloutputmixedaudioinawayprescribed  
by Dolby. Select “Stereo”, then the player will output a stereo signal.  
Dolby Digital Setup  
1. Dual Mono  
The function is used to set the output mode of channel left/right, stereo and mixed  
sound.  
2. Dynamic  
Usethisitemtoadjustlineardynamiccompressionratetogetdifferentsignalcompression  
effects.  
Video Setup  
1. Sharpness  
Use this item to adjust sharpness setting.  
- 20 -  
 
System Setup  
Video Setup - continued  
2. Brightness  
Use this item to adjust brightness level.  
3. Contrast  
Use this item to adjust contrast level.  
Preference Page  
1. Audio, Subtitle, Disc Menu  
This setting allows you to hear or read subtitles of a DVD in your choice of English,  
Spanish or French.  
2. Default Reset  
Use this function to reset all the settings.  
3. Version  
Displays software version information.  
NOTE: this menu function is not available while a disc is playing.  
Audio  
DVD discs contain up to 8 audio bit streams. For Example: English, French etc.  
To select the audio bit stream you prefer press the AUDIO button on the remote  
control during playback. The DVD player will play the next audio bit stream every  
time you press the AUDIO button in succession.  
NOTE: This function is only available for discs that several audio bit streams have  
been recorded onto.  
- 21 -  
 
Playback Functions  
Fast Forward & Rewind  
Press the and buttons to active fast forward or rewind.  
Slow Forward & Rewind  
Press the SLOW button to slow forward or rewind.  
Repeat  
1. Repeat a title, chapter or track. Press the REPEAT button on the remote control.  
Repeatedly pressing the REPEAT button will display a menu as follows: Chapter,  
Title and All.  
2. You cantemporarilymarkasectionofaDVDthatyouwouldliketoplayrepeatedly.  
You do this by marking the start and the end of the section using the A/B button.  
During playback press the A-B button on the remote control at the beginning of  
the segment (point A) you wish to play repeatedly. Press the A-B button again  
at the end of the segment (point B).  
The DVD player will automatically return to point A and repeat playback of the  
selected segment. (A-B). To resume normal playback press the A-B button again.  
Subtitle  
A DVD disc can be recorded with up to 32 subtitles.  
Press the SUBTITLE button on the remote control, the mode of subtitles will recycle  
as follows: SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle  
2 appears on the screen.  
SUBTITLE N/N: Subtitle N (N is the total number of subtitles that the current disc  
contains) appears on the screen. SUBTITLE OFF: No subtitle.  
NOTE: This function is available on DVD disc that recorded with multi-subtitles.  
Angle  
If the scene was recorded from multiple angles, you can easily change the camera  
angle of the scene you are watching.  
Press the ANGLE button on the remote control during playback. Playback will shift  
to another angle. If the disc menu gives the options of angles items, you can switch  
angles for viewing by pressing the number buttons on the remote control.  
NOTE: This function is only available if a disc is recorded with multiple angles.  
- 22 -  
 
Playback Functions  
Search by time  
You can use the GOTO button to search by time, namely to play from a specific  
time. During DVD playback, press the GOTO button once and the screen will display  
the title or chapter. Use the number buttons to select any one of them. Press the  
GOTO button twice, then you can use number buttons to input the time desired  
(hour, minute, second), and the player will play from the inputted time.  
NOTE: This function is only available for DVD discs.  
Resume Playback  
1. Press the STOP button at the location if you wish to interrupt playback. The player  
memorizes the location where playback was stopped.  
2. Press the PLAY button to resume normal playback. The player resumes playback  
from the location where you stopped playback. This function does not operate if  
the disc is removed.  
Press the STOP button twice or open the disc tray, playback will then be stop  
and when PLAY button is pressed, the play will begin from the beginning of disc.  
Playing an MP3  
MP3 is the third audio compression format of international standard MPEG, which  
compresses the audio signal at the rate of 12:1. Using MP3 format, one disc can  
record more than 600 minutes music, the sound quality is similar to that of CD  
discs.  
TherearemanydifferentformatsforstoringMP3songs.Usually,oneMP3discincludes  
many folders (directories) and every folder includes several files (songs).  
In stop status, use the LEFT/RIGHT directional navigation arrows to move cursor  
to “PLAY MODE” column, and use the UP/DOWN directional navigation arrows to  
select the play mode. Press the LEFT/RIGHT directional navigation arrows to confirm.  
Similarly, use the UP/DOWN directional navigation arrows to select the directory you  
want and press the OK button to enter it. Press the PLAY button to play the song  
you selected. In playing status, you can use the and buttons to select  
other songs.  
The player can only output stereo signal when playing MP3 discs.  
There is no search by time and slow playback function for MP3 discs.  
- 23 -  
 
Playback Functions  
Playing a JPEG  
JPEG is a common picture format that requires very little storage per image with a  
low loss rate in resolution. Hundreds of pictures can be stored on a disc in this  
format. In order to create digital albums from film pictures, have your film  
developer make a ”PICTURE CD”, in JPEG format.  
OPERATION  
1. Normal Playback  
Load a JPEG disc in. After reading the disc, OSD will display the menu (the left  
side is the main menu and the right side is its submenu). Use the direction buttons  
and ENTER button to choose items.  
Many discs have other items besides pictures.  
Use left/right button to move cursor to playback mode column, use the  
up/down button to confirm.  
2. Picture Rotation  
Pictures can be flipped and rotated while they are displayed. Once another picture  
is selected, rotating function will be turned off.  
There are four rotational modes available. Use the direction buttons to choose:  
W
X
UP  
Flip Vertical  
DOWN  
LEFT  
RIGHT  
Flip Horizontal  
Rotate Counter Clockwise  
Rotate Clockwise  
3. Zoom of Picture  
ZOOM button is used to turn on/off zoom and move function.  
When the zoom function is turned on, use the fast forward or reverse scan button  
to zoom in and out. Use the direction buttons to pan around on the image. Press  
the STOP button to activate preview mode. Press the MENU button to return to  
the root menu.  
Note: Due to the various ways JPEG discs are made, some images can only be  
played normally with no rotate or zooming functions.  
- 24 -  
 
Care of Discs  
How to hold discs  
Cleaning Care  
When loading or removing discs, do not  
touch their playing surfaces.  
Use a soft, dry cloth for cleaning. For  
stubborn dirt, soak the cloth in a mild  
detergentsolution;ringwellandwipe.Use  
a dry cloth to wipe the disc dry. Do not  
use any volatile agents such as benzine  
or paint thinner, as they may damage the  
surface of the player.  
Lens cleaner  
Cleaning  
Theplayerspickuplensshouldnotbecome  
dirty under normal use. If for some reason  
itshouldmalfunctionduetosoiling,contact  
yournearestauthorizedservicecenter.Lens  
cleaners are commercially available, but  
special care should be exercised in their  
usesincesomemaycausedamagetothe  
lens.  
Fingerprints or other dirt on the disc may  
affect sound and picture quality.  
To clean your discs, use a soft clean cloth  
to wipethem. If necessary, moisten a soft  
cloth with diluted neutral detergent to  
remove heavy dirt or fingerprints.  
Donotwipeinacirculardirection(Concentric  
scratchesinthediscgroovetendtocause  
noise.)  
Gently wipe from the inside to the outer  
edge.  
- 25 -  
 
About Rechargeable Battery  
Your portable DVD player comes with a lithium ion rechargeable battery that attaches  
to the bottom of the player.  
1. Under normal working conditions, the battery can be charged and discharged over  
300 times.  
2. The properties of the rechargeable battery are: 7.4 Volts, with a capacity of 4200mAh,  
interior lithiumionic electric circuit protection for recharge and discharge.  
3. If the battery is not used it will discharge gradually within one month.  
4. If you don’t plan on using the battery for an extended period of time, discharge the  
battery and keep it in a dry and cool place.  
5. If the battery loses power during play, stop playing the DVD, otherwise damage may  
occur.  
6. A fully charged battery is able to play a DVD with the TFT on for about 3 hours.  
Note: Playing time varies from disc to disc.  
7. Working conditions and precautions:  
New batteries should be fully charged before initial use  
Battery should only be used and charged when  
temperatures are between 32-95F  
Never put the battery in fire or water.  
Do not expose the battery to high temperatures  
or store in hot, sunny places.  
Maintain well-ventilated conditions around the product, avoiding heat. Don’t  
put the product on bed, sofa or anything that may block ventilation to the  
product.  
Don’t use metal to link positive pole to negative.  
Do not open the battery.  
Do not leave battery attached when using alternative power source such as  
car adaptor.  
Never charge the battery for more than 4 hours. Detach battery immediately  
after charging is complete.  
Detach battery when not in use.  
- 26 -  
 
Troubleshooting  
Symptom  
What To Check  
Make sure the AV IN/OUT switch on the side of the  
player unit is in the OUT position for standard play.  
Make sure the disc cover is closed.  
Make sure a disc is loaded.  
Make sure the disc isn’t loaded upside down.  
Disc should be clean, not dirty or warped.  
Playersregioncodeshouldbethesameasregioncode  
of DVD disc.  
The player cannot play.  
Haswatercondensationhasoccurred?Ifithas,remove  
the disc and keep the player powered up for at least  
two hours.  
Make sure system connection is correct.  
Make sure the speakers are turned on.  
Make sure the sound setup of DVD disc is correct.  
Is your disc dirty or warped? Clean or replace disc.  
There is no sound.  
Make TV is turned on and in correct video mode.  
Make sure your system connection is correct.  
There is no picture.  
Poor AV performance.  
Is your disc dirty or warped? Clean or replace disc.  
Make sure the player is not in A-B repeat status.  
Press A-B button to cancel it A-B repeat status.  
Is your disc dirty or warped? Clean or replace disc.  
Cannotcontinuetoplayandplay  
a section repeatedly.  
Make sure there aren’t any obstructions between the  
remote control and the player.  
Make sure you are pointing the remote control at the  
player.  
Theremotecontroldoesnotwork.  
Makesurebatteriesareinsertedcorrectly(checkpolarity).  
Replace weak batteries.  
WARNING: Do not touch any metal objects to the battery connectors, as it will put the  
battery in standby mode. To get out of standby mode please connect the battery and  
portable DVD player to AC or DC power.  
Other possibilities:  
Staticorotherexternalinterfere maycausetheplayertofunctionabnormally. Inthiscircumstance  
unplug the power-supply cord from the outlet and plug it in again to reset the player so that  
normal operation can resume. If you are still having problems, disconnect the power and consult  
your service center or a qualified technician.  
- 27 -  
 
Specifications  
TFT screen size  
8 inches  
Laser Wavelength  
Video System  
Wavelength: 780/650nm  
NTSC  
Frequency Response  
Audio Signal-to-noise Rate  
Audio distortion + noise  
Channel Separation  
Dynamic Range  
20Hz-20KHz ±2.5dB  
85Db  
-70dB (1KHz)  
70dB (1KHz)  
80dB (1KHz)  
0.2  
Analog Audio Out  
Digital Audio Out  
Out Level: 2V±  
,
Load: 10K  
Load: 75  
1.0  
Audio Out  
Video Out  
Out Level: 0.5VP-P,  
Out Level:1VP-P±0.2, Load:75  
Unbalanced Negative  
Video Out  
Power  
AC100-240V50/60Hz  
Power Consumption  
Dimension w/o battery  
Weight w/o battery  
25W  
215 mm x 160 mm x 32 mm  
0.95 kg or 2.09 lbs.  
Compliance with FCC, FDA - cUL listed E209155  
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential  
unpublished works. © 1992 -1997 Dolby Laboratories.  
All rights reserved.  
- 28 -  
 
Special Notes On Revolving TFT LCD Screen  
The revolving TFT LCD screen is one of the outstanding features about this product.  
For proper operation, follow these steps.  
1.Openthescreencovertoposition(A)asshown  
in left figure so the screen is vertical to the  
operation panel.  
Pos A  
2. The screen rotates horizontally about its axis  
intheclockwisedirectiononly. Whenthescreen  
is rotated to a maximum angle of 180 degrees  
(positionC),thescreenclicksandisnowfacing  
backward. To return the screen to the initial  
position(A)rotatethescreencounterclockwise.  
Pos B  
3. You can fold the screen flat from the vertical  
position (C) to the operation panel as indicated  
in left fig.  
Pos C  
4. The final position (D) has the screen facing  
upward with its back to operation panel. The  
screen can be locked into place with the latch  
Pos D  
hook as shown  
- 29 -  
 
For service, support and warranty information, visit www.polaroidelectronics.com or in  
the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call  
01-800-400-2443.  
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and  
licensed for use on the PDV-0800 to Petters Consumer Brands, LLC.  
- 30 -  
 

Peerless Industries TV Mount SF 632 User Manual
Philips Headphones SHK2010 User Manual
Philips Stereo System FW V355 User Manual
Philips Telephone Accessories SDJ6430 User Manual
Philips TV VCR Combo 21PV 288 User Manual
Poulan Tiller VF550 User Manual
Poulan Trimmer 530164077 User Manual
Poulan Trimmer PT7000 User Manual
Power Acoustik Car Video System PADVD 350 User Manual
PowerFile CD Player C200 Studio User Manual